Effect of ladle-lining materials on inclusion evolution in Al-killed steel during LF refining
High Temperature Materials and Processes · 13.03.2024 · 43 (1)
DOI: 10.1515/htmp-2022-0317 ↗Kurz gefasst
Fachartikel in der Zeitschrift High Temperature Materials and Processes, online erschienen am 13.03.2024. Verfasst von Fu-bin Gao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The effect of lining materials (Al 2 O 3 and Al 2 O 3 –MgO·Al 2 O 3 ) of ladle on evolution of non-metallic inclusions in aluminum-killed (Al-killed) steel during ladle furnace refining without Ca treatment was investigated through industrial experiments. The results showed that non-metallic inclusions experienced the changes from Al 2 O 3 → MgO–Al 2 O 3 → CaO–Al 2 O 3 . During the refining process using either of the two ladle lining materials, for all non-metallic inclusions, the vast majority are distributed in the high Al 2 O 3 area of the CaO–Al 2 O 3 –MgO phase diagram, with very little or none in the low melting point zone. Non-metallic inclusions are mainly smaller than 3 μm, while those larger than 3 μm consisted primarily of MgO·Al 2 O 3 and CaO–Al 2 O 3 inclusions. The use of an Al 2 O 3 –MgO·Al 2 O 3 -lining ladle is more effective in reducing the number density of inclusions in the steel. However, during the refining process, the Al 2 O 3 -lining ladle does not have a significant impact on the presence of MgO–Al 2 O 3 and CaO–Al 2 O 3 inclusions in the molten steel. The Al 2 O 3 –MgO·Al 2 O 3 -lining ladle does not have a significant effect on MgO–Al 2 O 3 inclusions, but it does promote the formation of CaO–Al 2 O 3 and CaS inclusions in the molten steel.
Zitieren
APA
Gao, F., Yan, X., Wang, F., Wang, X., & Li, J. (2024). Effect of ladle-lining materials on inclusion evolution in Al-killed steel during LF refining. High Temperature Materials and Processes, 43(1). https://doi.org/10.1515/htmp-2022-0317
Vancouver
Gao F, Yan X, Wang F, Wang X, Li J. Effect of ladle-lining materials on inclusion evolution in Al-killed steel during LF refining. High Temperature Materials and Processes. 2024;43(1). doi:10.1515/htmp-2022-0317
BibTeX
@article{Gao2024,
author = {Gao, Fu-bin and Yan, Xinbo and Wang, Fuming and Wang, Xinhua and Li, Jianli},
title = {Effect of ladle-lining materials on inclusion evolution in Al-killed steel during LF refining},
journal = {High Temperature Materials and Processes},
year = {2024},
volume = {43},
number = {1},
doi = {10.1515/htmp-2022-0317}
}
EUVIMED