EUVIMEDEUVIMED entdecken
Crossref

Diamond Burnishing of Hard Turned Bainitic Components

Y. Kotsun, A. Silveira, J. Sölter, J. Epp, B. Karpuschewski, D. Becker, J. Rollmann

HTM Journal of Heat Treatment and Materials · 20.08.2026 · 81 (4) · 179-191

DOI: 10.1515/htm-2026-0011 ↗

Kurz gefasst

Fachartikel in der Zeitschrift HTM Journal of Heat Treatment and Materials, online erschienen am 20.08.2026. Verfasst von Y. Kotsun und 6 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bainitic steels are widely used in bearing systems for demanding applications such as wind turbines, where surface integrity plays a decisive role in fatigue resistance and service life. Hard turning as a productive finishing process may thermally affect the workpiece surface layer, particularly once initial tool wear sets in. Fine finishing processes might be needed to correct the detrimental effect on functional properties in these cases. In this study, the influence of hard turning and diamond burnishing on surface roughness, residual stresses, and near-surface microstructural modifications is investigated. The results demonstrate that diamond burnishing reduces surface roughness by approximately 80 % in terms of R a and 78 % in terms of R z , while simultaneously introducing high compressive residual stresses averaging 1200 MPa to depths of up to 160 μm. Importantly, no evidence of white etching layers was detected on initially hard-turned specimens, indicating that the process primarily modifies the residual stress state and surface topography without inducing detrimental thermal effects. These findings highlight the potential of diamond burnishing to improve the functional performance and service life of highly loaded power transmission parts.

Zitieren

APA

Kotsun, Y., Silveira, A., Sölter, J., Epp, J., Karpuschewski, B., Becker, D., & Rollmann, J. (2026). Diamond Burnishing of Hard Turned Bainitic Components. HTM Journal of Heat Treatment and Materials, 81(4), 179-191. https://doi.org/10.1515/htm-2026-0011

Vancouver

Kotsun Y, Silveira A, Sölter J, Epp J, Karpuschewski B, Becker D, et al. Diamond Burnishing of Hard Turned Bainitic Components. HTM Journal of Heat Treatment and Materials. 2026;81(4):179-191. doi:10.1515/htm-2026-0011

BibTeX
@article{Kotsun2026,
  author = {Kotsun, Y. and Silveira, A. and Sölter, J. and Epp, J. and Karpuschewski, B. and Becker, D. and Rollmann, J.},
  title = {Diamond Burnishing of Hard Turned Bainitic Components},
  journal = {HTM Journal of Heat Treatment and Materials},
  year = {2026},
  volume = {81},
  number = {4},
  pages = {179--191},
  doi = {10.1515/htm-2026-0011}
}
Kostenlos starten →