EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sinter Hardening PM Steels Prepared through Hybrid Alloying

S. Geroldinger, R. de Oro Calderon, C. Gierl-Mayer, H. Danninger

HTM Journal of Heat Treatment and Materials · 30.04.2021 · 76 (2) · 105-119

DOI: 10.1515/htm-2020-0007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift HTM Journal of Heat Treatment and Materials, online erschienen am 23.04.2021. Verfasst von S. Geroldinger und 3 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In powder metallurgy (PM), there are several ways of introducing alloying elements into a PM material in order to adjust a certain alloying element content. Each alloying route has its advantages and disadvantages. Master alloys (MA), powders with a high content of typically several alloying elements, can be added in small amounts to a base powder, especially to introduce oxygen sensitive elements such as Cr, Mn, and Si. In addition, the master alloy can be designed in such a way that a liquid phase is formed intermediately during the sintering process to improve the distribution of alloying elements in the material and to accelerate homogenization. In this study, such master alloys were combined with pre-alloyed base powders to form hybrid alloyed mixtures with the aim of improving the material‘s sinter hardenability. The hybrid alloys were compared with mixtures of master alloy and plain Fe as reference material. The sinter hardenability of all materials was determined by generating CCT diagrams recorded with 13 different cooling rates. These were verified by metallographic cross-sections of specimens treated at common cooling rates of 3 and 1.5 K/s and subsequent hardness measurements of the microhardness (HV 0.1) of the microstructural constituents and the apparent hardness (HV 30). ◼

Zitieren

APA

Geroldinger, S., Calderon, R. D. O., Gierl-Mayer, C., & Danninger, H. (2021). Sinter Hardening PM Steels Prepared through Hybrid Alloying. HTM Journal of Heat Treatment and Materials, 76(2), 105-119. https://doi.org/10.1515/htm-2020-0007

Vancouver

Geroldinger S, Calderon RDO, Gierl-Mayer C, Danninger H. Sinter Hardening PM Steels Prepared through Hybrid Alloying. HTM Journal of Heat Treatment and Materials. 2021;76(2):105-119. doi:10.1515/htm-2020-0007

BibTeX
@article{Geroldinger2021,
  author = {Geroldinger, S. and Calderon, R. de Oro and Gierl-Mayer, C. and Danninger, H.},
  title = {Sinter Hardening PM Steels Prepared through Hybrid Alloying},
  journal = {HTM Journal of Heat Treatment and Materials},
  year = {2021},
  volume = {76},
  number = {2},
  pages = {105--119},
  doi = {10.1515/htm-2020-0007}
}
Kostenlos starten →