EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Probing the physicochemical properties of wood pellet surfaces in an axial direction with confocal Raman microscopy

Stefan Frodeson, Illia Dobryden, Jonas Berghel, Agne Swerin

Holzforschung · 24.07.2026 · 80 (7) · 555-570

DOI: 10.1515/hf-2025-0133 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Holzforschung, online erschienen am 24.06.2026. Verfasst von Stefan Frodeson und 3 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The pelletization of lignocellulosic biomass is essential for producing energy-efficient and easily transportable products due to high density and low moisture content. A hard, glossy surface is often associated with high-quality pellets; however, the composition and formation of this surface layer remain insufficiently understood. This study examines the surface and what components it contains using confocal Raman imaging. Four pellet types were analyzed: pure cellulose and three spruce-based variants. Scanning electron microscopy (SEM) revealed a glossy layer in all the samples, with thicknesses of 2.1 ± 0.3 µm for cellulose, 2.9 ± 1.3 µm for spruce, 4.8 ± 1.5 µm for spruce from cross-laminated timber (CLT), and 5.7 ± 1.1 µm for the spruce–starch pellet. The glossy upper layer was further characterized using confocal Raman imaging with a 532 nm laser. The results of Raman imaging indicate that biopolymer migration reduced crystallinity of the cellulose structure near the pellet surface, reflected by a decreased I 380 / I 1096 ratio. A method to evaluate the migration of lignin – and potentially hemicellulose or lipophilic extractives – to the surface of spruce-based pellets is also proposed. These findings provide new insights into the factors contributing to pellet surface gloss and may support improved pellet production.

Zitieren

APA

Frodeson, S., Dobryden, I., Berghel, J., & Swerin, A. (2026). Probing the physicochemical properties of wood pellet surfaces in an axial direction with confocal Raman microscopy. Holzforschung, 80(7), 555-570. https://doi.org/10.1515/hf-2025-0133

Vancouver

Frodeson S, Dobryden I, Berghel J, Swerin A. Probing the physicochemical properties of wood pellet surfaces in an axial direction with confocal Raman microscopy. Holzforschung. 2026;80(7):555-570. doi:10.1515/hf-2025-0133

BibTeX
@article{Frodeson2026,
  author = {Frodeson, Stefan and Dobryden, Illia and Berghel, Jonas and Swerin, Agne},
  title = {Probing the physicochemical properties of wood pellet surfaces in an axial direction with confocal Raman microscopy},
  journal = {Holzforschung},
  year = {2026},
  volume = {80},
  number = {7},
  pages = {555--570},
  doi = {10.1515/hf-2025-0133}
}
Kostenlos starten →