EUVIMEDEUVIMED entdecken
Crossref

Processing of Pinus sylvestris L. into a heat-insulating, thermally stable, and flame-retarded material by combining the flame-retardant impregnation and densification treatment

Zhisheng Xu, Wenjun Zhao, Long Yan, Xinyu Tang, Yuwei Feng, Zhengyang Wang

Holzforschung · 26.10.2023 · 77 (10) · 762-775

DOI: 10.1515/hf-2023-0044 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Holzforschung, online erschienen am 08.09.2023. Verfasst von Zhisheng Xu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Key Research and Development Program of Hunan Province of China, Fundamental Research Funds for Central Universities of the Central South University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flame-retardant impregnation and densification are two major modification techniques to improve the fire safety of wood. Here, these two techniques were combined to prepare flame-retarded wood, aiming at further fire hazard reduction. The delignated Pinus sylvestris L. was impregnated with boric acid (BA) and graphene oxide (GO) solutions, then densified to prepare densified flame-retarded wood named BGO-DW sample. The results revealed that the BGO-DW sample obtained a limiting oxygen index (LOI) value of 47.4 %. Its backside temperature after 1200 s heating was 49 % lower than that of unmodified wood. Besides, the peak heat release rate (PHRR) and total heat release (THR) values of BGO-DW sample were 72 and 62 % lower than those of unmodified wood due to its shorter pyrolysis interval and lower peak mass loss rate (PMLR), as supported by thermogravimetric (TG) analysis. The flame retardancy of BGO-DW sample could be attributed to the formation of compatible char containing C=C aromatic structure, C–O–C cross-linked structure, and boron trioxide (B 2 O 3 ) structure. These features of BGO-DW sample offer a new method to improve thermal stability, heat insulation, and flame retardancy for wood and wood-based products.

Förderung

  • National Natural Science Foundation of China
  • Key Research and Development Program of Hunan Province of China
  • Fundamental Research Funds for Central Universities of the Central South University

Zitieren

APA

Xu, Z., Zhao, W., Yan, L., Tang, X., Feng, Y., & Wang, Z. (2023). Processing of Pinus sylvestris L. into a heat-insulating, thermally stable, and flame-retarded material by combining the flame-retardant impregnation and densification treatment. Holzforschung, 77(10), 762-775. https://doi.org/10.1515/hf-2023-0044

Vancouver

Xu Z, Zhao W, Yan L, Tang X, Feng Y, Wang Z. Processing of Pinus sylvestris L. into a heat-insulating, thermally stable, and flame-retarded material by combining the flame-retardant impregnation and densification treatment. Holzforschung. 2023;77(10):762-775. doi:10.1515/hf-2023-0044

BibTeX
@article{Xu2023,
  author = {Xu, Zhisheng and Zhao, Wenjun and Yan, Long and Tang, Xinyu and Feng, Yuwei and Wang, Zhengyang},
  title = {Processing of Pinus sylvestris L. into a heat-insulating, thermally stable, and flame-retarded material by combining the flame-retardant impregnation and densification treatment},
  journal = {Holzforschung},
  year = {2023},
  volume = {77},
  number = {10},
  pages = {762--775},
  doi = {10.1515/hf-2023-0044}
}
Kostenlos starten →