EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Possible Applications of Hardening Slurries with Fly Ash from Thermal Treatment of Municipal Sewage Sludge in Environmental Protection Structures

Paweł Falacinski, Łukasz Szarek

Archives of Hydro-Engineering and Environmental Mechanics · 2016

DOI: 10.1515/heem-2016-0004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Hydro-Engineering and Environmental Mechanics, 2016. Verfasst von Paweł Falacinski und 1 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In Poland, in recent years, there has been a rapid accumulation of sewage sludge - a by-product in the treatment of urban wastewater. This has come about as a result of infrastructure renewal, specifically, the construction of modern sewage treatment plants. The more stringent regulations and strategic goals adopted for modern sewage management have necessitated the application of modern engineering methodology for the disposal of sewage sludge. One approach is incineration. As a consequence, the amount of fly ash resulting from the thermal treatment of municipal sewage sludge has grown significantly. Hence, intensive work is in progress for environmentally safe management of this type of waste. The aim of the experiment was to evaluate the possibility of using the fly ash that results from municipal sewage sludge thermal treatment (SSTT) as an additive to hardening slurries. This type of hardening slurry with various types of additives, e.g. coal combustion products, is used in the construction of cut-off walls in hydraulic structures. The article presents the technological and functional parameters of hardening slurries with an addition of fly ash obtained by SSTT. Moreover, the usefulness of these slurries is analysed on the basis of their basic properties, i.e. density, contractual viscosity, water separation, structural strength, volumetric density, hydraulic conductivity, compressive and tensile strength. The mandated requirements for slurries employed in the construction of cut-off walls in flood embankments are listed as a usefulness criteria. The article presents the potential uses of fly ash from SSTT in hardening slurry technology. It also suggests directions for further research to fully identify other potential uses of this by-product in this field.

Zitieren

APA

Falacinski, P., & Szarek, Ł. (2016). Possible Applications of Hardening Slurries with Fly Ash from Thermal Treatment of Municipal Sewage Sludge in Environmental Protection Structures. Archives of Hydro-Engineering and Environmental Mechanics. https://doi.org/10.1515/heem-2016-0004

Vancouver

Falacinski P, Szarek Ł. Possible Applications of Hardening Slurries with Fly Ash from Thermal Treatment of Municipal Sewage Sludge in Environmental Protection Structures. Archives of Hydro-Engineering and Environmental Mechanics. 2016. doi:10.1515/heem-2016-0004

BibTeX
@article{Falacinski2016,
  author = {Falacinski, Paweł and Szarek, Łukasz},
  title = {Possible Applications of Hardening Slurries with Fly Ash from Thermal Treatment of Municipal Sewage Sludge in Environmental Protection Structures},
  journal = {Archives of Hydro-Engineering and Environmental Mechanics},
  year = {2016},
  doi = {10.1515/heem-2016-0004}
}
Kostenlos starten →