Highly stable dual-carbon conductive TPU composites for intelligent strain sensing: experiments and molecular simulation
e-Polymers · 23.01.2026 · 26 (1)
DOI: 10.1515/epoly-2026-0016 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Polymers, online erschienen am 20.07.2026. Verfasst von Lidan Li und 2 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Soft interlayered rock slopes with gently dipping bedding planes are highly susceptible to deformation accumulation, local strain concentration, and instability during dynamic excavation and construction. However, conventional stability analysis and monitoring methods are mainly based on static mechanical models or external sensing devices, which are insufficient for capturing real-time deformation evolution under repeated disturbance. Therefore, highly flexible, sensitive, and cyclically stable intelligent sensing materials are required for dynamic deformation monitoring and support optimization. In this study, graphene (GR) and multi-walled carbon nanotubes (MWCNTs) were incorporated into thermoplastic polyurethane (TPU) through a dual-carbon synergistic strategy to construct a highly stable conductive strain-sensing composite. The mechanical, electrical, morphological, rheological, and viscoelastic properties of the composites were systematically characterized by tensile testing, cyclic resistance-strain measurements, current–voltage (I–V) analysis, scanning electron microscopy (SEM), rubber process analysis (RPA), and dynamic mechanical analysis (DMA). The results showed that the two-dimensional GR framework and one-dimensional MWCNT bridges formed a multiscale “plane-line” conductive network, which improved filler dispersion, enhanced interfacial load transfer, and promoted reversible reconstruction of conductive pathways. Consequently, the optimized MGTPU composite achieved a high gauge factor of 9,462.56, a low resistive hysteresis area of 11.29 %, excellent cyclic durability, and stable resistance response under large deformation. Molecular dynamics (MD) simulation was further conducted in parallel with the experimental investigation to reveal the molecular origin of the enhanced electromechanical stability, which cannot be directly identified from macroscopic tests alone. The MD analysis focused on mean square displacement (MSD), radial distribution function (RDF), fractional free volume (FFV), and interfacial binding energy. Compared with the single-filler systems, MGTPU exhibited the lowest molecular chain mobility, the strongest interfacial atomic ordering, the lowest FFV of 7.62 %, and the highest absolute binding energy of approximately 3.6 × 10 4 kcal/mol. These simulation results confirm that the GR-MWCNT synergistic network restricts TPU chain motion, strengthens filler-matrix interfacial bonding, reduces free volume, and suppresses conductive network relaxation during cyclic deformation. Therefore, the combined experimental and MD results demonstrate that the dual-carbon strategy enhances strain sensitivity and cyclic stability by simultaneously stabilizing the conductive network at the microscopic scale and reinforcing molecular-level interfacial confinement. This study provides a material design strategy and molecular-level mechanism for developing high-performance TPU-based flexible strain sensors for intelligent deformation monitoring in slope engineering and other structural health monitoring applications.
Zitieren
APA
Li, L., Zhou, J., & Li, C. (2026). Highly stable dual-carbon conductive TPU composites for intelligent strain sensing: experiments and molecular simulation. e-Polymers, 26(1). https://doi.org/10.1515/epoly-2026-0016
Vancouver
Li L, Zhou J, Li C. Highly stable dual-carbon conductive TPU composites for intelligent strain sensing: experiments and molecular simulation. e-Polymers. 2026;26(1). doi:10.1515/epoly-2026-0016
BibTeX
@article{Li2026,
author = {Li, Lidan and Zhou, Jianying and Li, Cheng},
title = {Highly stable dual-carbon conductive TPU composites for intelligent strain sensing: experiments and molecular simulation},
journal = {e-Polymers},
year = {2026},
volume = {26},
number = {1},
doi = {10.1515/epoly-2026-0016}
}
EUVIMED