EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of porous thermoplastic polyurethane monoliths via thermally induced phase separation for oil/water separation

Jiaxian Tan, Xiaodong Xu, Yang Zhang, Chengping Miao, Jianxing Yu, Xiaohua Tu

e-Polymers · 23.01.2026 · 26 (1)

DOI: 10.1515/epoly-2025-0084 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Polymers, online erschienen am 05.06.2026. Verfasst von Jiaxian Tan und 5 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The preparation of polyurethane-based porous materials from waste sources for the selective separation of oil from contaminated water has attracted significant attention. In this study, a hydrophobic and oleophilic porous thermoplastic polyurethane (TPU) monolith was fabricated via a thermally induced phase separation (TIPS) method. The optimal preparation conditions, determined through orthogonal experiments, were as follows: a TPU concentration of 2.8 g per 40 mL of solvent, a solvent ratio of 1,4-dioxane to water at 11:1 (v/v), and a freezing temperature of −20 °C. The resulting TPU monolith exhibited excellent adsorption performance, capable of absorbing oils and organic solvents up to 6–55 times its own weight. Moreover, it maintained stable adsorption capacity under harsh conditions, including exposure to strong acids, strong bases, and a wide temperature range. The material also demonstrated effectiveness in removing trace organic pollutants from oil-in-water emulsions.

Zitieren

APA

Tan, J., Xu, X., Zhang, Y., Miao, C., Yu, J., & Tu, X. (2026). Fabrication of porous thermoplastic polyurethane monoliths via thermally induced phase separation for oil/water separation. e-Polymers, 26(1). https://doi.org/10.1515/epoly-2025-0084

Vancouver

Tan J, Xu X, Zhang Y, Miao C, Yu J, Tu X. Fabrication of porous thermoplastic polyurethane monoliths via thermally induced phase separation for oil/water separation. e-Polymers. 2026;26(1). doi:10.1515/epoly-2025-0084

BibTeX
@article{Tan2026,
  author = {Tan, Jiaxian and Xu, Xiaodong and Zhang, Yang and Miao, Chengping and Yu, Jianxing and Tu, Xiaohua},
  title = {Fabrication of porous thermoplastic polyurethane monoliths via thermally induced phase separation for oil/water separation},
  journal = {e-Polymers},
  year = {2026},
  volume = {26},
  number = {1},
  doi = {10.1515/epoly-2025-0084}
}
Kostenlos starten →