Effect of nano-TiO 2 on physical and rheological properties of asphalt cement
Open Engineering · 12.02.2024 · 14 (1)
DOI: 10.1515/eng-2022-0520 ↗Kurz gefasst
Fachartikel in der Zeitschrift Open Engineering, online erschienen am 12.02.2024. Verfasst von Ahmed Mahir Mohammed und 1 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In recent years, nano-modified asphalt has gained significant attraction from researchers in the design of asphalt pavement fields. The recently discovered Titanium dioxide nanoparticles (TiO 2 ) are among the most exciting and promising nanomaterials. This study examines the effect of 1, 3, 5, and 7% of nano-TiO 2 by weight of asphalt on some of its rheological and hardened properties. The experimental study included physical and rheological properties. The asphalt penetration, softening point, ductility, and rotational viscometer tests indicate that 5% nano-TiO 2 is the ideal amount to be added to bitumen as a modifier. The study of the rotating viscosity test showed that the addition of nano-TiO 2 helped to increase viscosity and lessen bituminous sensitivity. Rutting factor in terms of G */sin δ indicated the addition of 3 to 7% of nano-TiO 2 increased the rutting resistance of asphalt against higher temperatures and promoted performance grade by about one grade at 3% and two grades at a range of 5–7% this suggests that nano-TiO 2 increased the stiffness of the asphalt and leading to enhance the rutting performance of asphalt. While fatigue parameter, G *.sin δ shows that as nanocontent increases, higher stiffness at 5 and 7% of TiO 2 content leads to an increase in complex modulus and a decrease in fatigue parameter. Higher creep stiffness and higher m -values were noted at low temperatures as nano increases in asphalt binder, increasing stiffness and decreasing the m -value at −6 and 12°C. As a result, using 5% nano-TiO 2 will improve asphalt’s physical properties and enhance asphalt anit-rutting and fatigue resistance.
Zitieren
APA
Mohammed, A. M., & Abed, A. H. (2024). Effect of nano-TiO 2 on physical and rheological properties of asphalt cement. Open Engineering, 14(1). https://doi.org/10.1515/eng-2022-0520
Vancouver
Mohammed AM, Abed AH. Effect of nano-TiO 2 on physical and rheological properties of asphalt cement. Open Engineering. 2024;14(1). doi:10.1515/eng-2022-0520
BibTeX
@article{Mohammed2024,
author = {Mohammed, Ahmed Mahir and Abed, Alaa H.},
title = {Effect of nano-TiO 2 on physical and rheological properties of asphalt cement},
journal = {Open Engineering},
year = {2024},
volume = {14},
number = {1},
doi = {10.1515/eng-2022-0520}
}
EUVIMED