High Power Density Levitation-Induced Vibration Energy Harvester
Energy Harvesting and Systems · 2014
DOI: 10.1515/ehs-2013-0005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Harvesting and Systems, 2014. Verfasst von Daniel J. Apo und 1 weiteren Autor:innen. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 23 Literaturangaben.
Abstract (Originalsprache)
We report a levitation-induced vibration energy harvester based on a double-repulsion configuration in the moving magnet composite. Computational modeling clearly illustrated the advantages of the double-repulsion configuration over the single-repulsion and no-repulsion configurations. Double-repulsion configuration provided the best dynamics (displacement and velocity) and output response (voltage). Based on the modeling results, an AA battery-sized harvester with the double-repulsion configuration was fabricated. The harvester exhibited high power response at low frequencies (12.9 mW at 1 g and 16 Hz) and also exhibited a high normalized power density at low excitations (15.33 mW cm −3 g −2 at 0.25 g and 13 Hz). The harvester was used to charge a cellphone at 4.7 V DC.
Zitieren
APA
Apo, D. J., & Priya, S. (2014). High Power Density Levitation-Induced Vibration Energy Harvester. Energy Harvesting and Systems. https://doi.org/10.1515/ehs-2013-0005
Vancouver
Apo DJ, Priya S. High Power Density Levitation-Induced Vibration Energy Harvester. Energy Harvesting and Systems. 2014. doi:10.1515/ehs-2013-0005
BibTeX
@article{Apo2014,
author = {Apo, Daniel J. and Priya, Shashank},
title = {High Power Density Levitation-Induced Vibration Energy Harvester},
journal = {Energy Harvesting and Systems},
year = {2014},
doi = {10.1515/ehs-2013-0005}
}
EUVIMED