Vibration Modeling of Arc-Based Cantilevers for Energy Harvesting Applications
Energy Harvesting and Systems · 2014
DOI: 10.1515/ehs-2013-0002 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Harvesting and Systems, 2014. Verfasst von Daniel J. Apo und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 17 Literaturangaben.
Abstract (Originalsprache)
Cantilever beams are widely used for designing transducers for low-frequency vibration energy harvesting. However, in order to keep the dimensions within reasonable constraints, a large tip mass is generally required for reducing the resonance frequency below 100 Hz which has adverse effect on the reliability. This study provides a breakthrough toward realizing low-frequency micro-scale transduction structures. An analytical out-of-plane vibration model for standalone arc-based cantilever beams was developed that includes provisions for shear and rotary inertia, multidirectional arcs, and multiple layers. The model was applied to a multilayered cantilever beam (10-mm wide and 0.1-mm thick) composed of three arcs, and the results indicate that the fundamental bending mode of the beam was 38 Hz for a silicon substrate thickness of 100 μm. The model was validated with modal experimental results from an arc-based cantilever made out of aluminum.
Zitieren
APA
Apo, D. J., Sanghadasa, M., & Priya, S. (2014). Vibration Modeling of Arc-Based Cantilevers for Energy Harvesting Applications. Energy Harvesting and Systems. https://doi.org/10.1515/ehs-2013-0002
Vancouver
Apo DJ, Sanghadasa M, Priya S. Vibration Modeling of Arc-Based Cantilevers for Energy Harvesting Applications. Energy Harvesting and Systems. 2014. doi:10.1515/ehs-2013-0002
BibTeX
@article{Apo2014,
author = {Apo, Daniel J. and Sanghadasa, Mohan and Priya, Shashank},
title = {Vibration Modeling of Arc-Based Cantilevers for Energy Harvesting Applications},
journal = {Energy Harvesting and Systems},
year = {2014},
doi = {10.1515/ehs-2013-0002}
}
EUVIMED