EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 3.0

Computational Fluid Dynamics and Experimental Studies of a New Mixing Element in a Static Mixer as a Heat Exchanger

Maciej Konopacki, Marian Kordas, Karol Fijałkowski, Rafał Rakoczy

Chemical and Process Engineering · 2015

DOI: 10.1515/cpe-2015-0005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemical and Process Engineering, 2015. Verfasst von Maciej Konopacki und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The main aim of this work is to study the thermal efficiency of a new type of a static mixer and to analyse the flow and temperature patterns and heat transfer efficiency. The measurements were carried out for the static mixer equipped with a new mixing insert. The heat transfer enhancement was determined by measuring the temperature profiles on each side of the heating pipe as well as the temperature field inside the static mixer. All experiments were carried out with varying operating parameters for four liquids: water, glycerol, transformer oil and an aqueous solution of molasses. Numerical CFD simulations were carried out using the two-equation turbulence k-ω model, provided by ANSYS Workbench 14.5 software. The proposed CFD model was validated by comparing the predicted numerical results against experimental thermal database obtained from the investigations. Local and global convective heat transfer coefficients and Nusselt numbers were detrmined. The relationship between heat transfer process and hydrodynamics in the static mixer was also presented. Moreover, a comparison of the thermal performance between the tested static mixer and a conventional empty tube was carried out. The relative enhancement of heat transfer was characterised by the rate of relative heat transfer intensification.

Zitieren

APA

Konopacki, M., Kordas, M., Fijałkowski, K., & Rakoczy, R. (2015). Computational Fluid Dynamics and Experimental Studies of a New Mixing Element in a Static Mixer as a Heat Exchanger. Chemical and Process Engineering. https://doi.org/10.1515/cpe-2015-0005

Vancouver

Konopacki M, Kordas M, Fijałkowski K, Rakoczy R. Computational Fluid Dynamics and Experimental Studies of a New Mixing Element in a Static Mixer as a Heat Exchanger. Chemical and Process Engineering. 2015. doi:10.1515/cpe-2015-0005

BibTeX
@article{Konopacki2015,
  author = {Konopacki, Maciej and Kordas, Marian and Fijałkowski, Karol and Rakoczy, Rafał},
  title = {Computational Fluid Dynamics and Experimental Studies of a New Mixing Element in a Static Mixer as a Heat Exchanger},
  journal = {Chemical and Process Engineering},
  year = {2015},
  doi = {10.1515/cpe-2015-0005}
}
Kostenlos starten →