EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An analysis of initial force and moment delivery of different aligner materials

Thomas Wendl, Brigitte Wendl, Peter Proff

Biomedical Engineering / Biomedizinische Technik · 26.06.2025 · 70 (3) · 259-267

DOI: 10.1515/bmt-2025-0003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomedical Engineering / Biomedizinische Technik, online erschienen am 03.03.2025. Verfasst von Thomas Wendl und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthodontics, 9147 University of Regensburg , Regensburg, Germany. Hauptthemen laut MEDLINE: Orthodontic Appliances. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

The aim of this study was to clarify the applied initial forces and moments by different aligners of various materials and manufacturing methods.

Methods

The finite-element-method was used to analyze the forces and moments generated by the aligners on a maloccluded tooth. Plaster models of dental arches with a mesiorotated tooth 11 were fabricated, digitized and virtually analyzed. Four types of aligners with various layer thicknesses were selected: two splints with novel shape memory properties: a printable aligner made of the resin Tera Harz TC-85 DAC (Graphy Inc., South Korea) and a self-manufactured aligner consisting of the components polypropylene carbonate and thermoplastic polyurethane. The other two aligners were conventional, thermoformable aligners: CA ® Pro Clear Aligner (Scheu Dental GmbH, Germany) and Erkodur-al (Erkodent Erich Kopp GmbH, Germany).

Results

The force and moment analyses showed that the thermoformable CA ® Pro Clear Aligner exhibited the highest values. The thermoformed Erkodur-al aligner showed the lowest force loads for all layer thicknesses. The Graphy printed splint showed similar results compared to Erkodur-al at layer thicknesses of 0.40 mm and 0.50 mm.

Conclusions

To avoid periodontal overloading, aligners with lower force and moment delivery should be chosen for this type of tooth movement.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Orthodontic AppliancesHumansFinite Element Analysis

Stichwörter der Autor:innen

alignerfinite-element-methodforcemomentshape-memorysingle-multilayer

Autor:innen und Institutionen

  • Department of Orthodontics, 9147 University of Regensburg , Regensburg, Germany.
  • Department of Orthodontics, Medical University Graz, Graz, Austria.

Zitieren

APA

Wendl, T., Wendl, B., & Proff, P. (2025). An analysis of initial force and moment delivery of different aligner materials. Biomedical Engineering / Biomedizinische Technik, 70(3), 259-267. https://doi.org/10.1515/bmt-2025-0003

Vancouver

Wendl T, Wendl B, Proff P. An analysis of initial force and moment delivery of different aligner materials. Biomedical Engineering / Biomedizinische Technik. 2025;70(3):259-267. doi:10.1515/bmt-2025-0003

BibTeX
@article{Wendl2025,
  author = {Wendl, Thomas and Wendl, Brigitte and Proff, Peter},
  title = {An analysis of initial force and moment delivery of different aligner materials},
  journal = {Biomedical Engineering / Biomedizinische Technik},
  year = {2025},
  volume = {70},
  number = {3},
  pages = {259--267},
  doi = {10.1515/bmt-2025-0003}
}
Kostenlos starten →