EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A component-based theory for sewing thread consumption: modeling overlock stitches via needle and looper kinematics

Faouzi Khedher, Thouraya Hamdi, Boubaker Jaouachi, Mohamed Jmali

AUTEX Research Journal · 23.01.2026 · 26 (1)

DOI: 10.1515/aut-2025-0115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AUTEX Research Journal, online erschienen am 30.10.2026. Verfasst von Faouzi Khedher und 3 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Princess Nourah bint Abdulrahman University Researchers Supporting Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate estimation of sewing thread consumption is critical for cost optimization, material management, and waste reduction in the denim garment manufacturing sector. This study proposes a novel, component-based methodology that decouples thread consumption from specific sewing machine models by focusing on needle and looper kinematics. Four overlock machine configurations (utilizing 3, 4, 5, and 6 threads) were evaluated using three denim variants and a lining fabric, with areal densities. Principal component analysis (PCA) was implemented for dimensionality reduction, explaining 80.11 % of the total empirical variance (V1 = 68.23 %; V2 = 11.88 %) and successfully condensing the 18 initial response parameters into four functional clusters monitored by specific proxy variables (3RNT, 3LLT, 5SLT, and 6HLT). Full factorial regression models revealed high explanatory and predictive power for the right needle thread (3RNT), achieving an R 2 of 97.90 % and a predictive R 2 of 94.71 %. The 6-thread higher looper didn’t behave as expected because of friction and tiny movements that happen when threads are packed tightly together. But when we tested it in a real-world setting, like sewing trouser seams, the results were very good. The errors were really small – only 0.68 % for the threads that the needle uses and 3.43 % for the threads that the looper uses. This is much better than the 5 % error rate that’s usually allowed in industry. So, the system we developed is a strong tool for planning production automatically. It can help make sure that things are made correctly and efficiently, which is important for making clothes and other textiles.

Förderung

  • Princess Nourah bint Abdulrahman University Researchers Supporting Project

Zitieren

APA

Khedher, F., Hamdi, T., Jaouachi, B., & Jmali, M. (2026). A component-based theory for sewing thread consumption: modeling overlock stitches via needle and looper kinematics. AUTEX Research Journal, 26(1). https://doi.org/10.1515/aut-2025-0115

Vancouver

Khedher F, Hamdi T, Jaouachi B, Jmali M. A component-based theory for sewing thread consumption: modeling overlock stitches via needle and looper kinematics. AUTEX Research Journal. 2026;26(1). doi:10.1515/aut-2025-0115

BibTeX
@article{Khedher2026,
  author = {Khedher, Faouzi and Hamdi, Thouraya and Jaouachi, Boubaker and Jmali, Mohamed},
  title = {A component-based theory for sewing thread consumption: modeling overlock stitches via needle and looper kinematics},
  journal = {AUTEX Research Journal},
  year = {2026},
  volume = {26},
  number = {1},
  doi = {10.1515/aut-2025-0115}
}
Kostenlos starten →