Cut resistance of coated structures with different geometries: an unsupervised machine learning approach
AUTEX Research Journal · 23.01.2026 · 26 (1)
DOI: 10.1515/aut-2025-0109 ↗Kurz gefasst
Fachartikel in der Zeitschrift AUTEX Research Journal, online erschienen am 09.11.2026. Verfasst von Taras Panskyi und 3 weiteren Autor:innen. Die Arbeit nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This research was funded in whole by National Science Centre, Poland..
Abstract (Originalsprache)
This research explores how 3D polymer surface structuring interacts mechanically with cut-shielding capabilities of high-strength aramid textile structures. While traditional coatings often compromise flexibility for protection, this research explores how specific geometric motifs as ellipse, diamond, and stripes, redistribute mechanical stress during a cutting event. Using the EN ISO 13997 standard as a benchmark, we analyzed the influence of pattern orientation and blade attack angles (45°–90°) on cut-force thresholds. The results reveal that diamond-shaped geometries provide superior protection (up to 27.4 N) by inducing an “edge-locking” effect that obstructs blade progression, unlike the “gliding” effect observed in elliptical patterns. To eliminate subjectivity in performance classification, an unsupervised machine learning framework was implemented. Applying a customized variant of the NbClust decision-combining approach, the study objectively validated the clustering of protective performance based on geometric parameters. This data-driven analysis confirms that the surface architecture, rather than material volume alone, is the primary determinant of cut resistance. These discoveries offer a strong baseline guiding the creation of next-generation, lightweight personal protective equipment (PPE) with optimized safety-to-weight ratios.
Förderung
- This research was funded in whole by National Science Centre, Poland.
Zitieren
APA
Panskyi, T., Korzeniewska, E., Kropidłowska, P., & Irzmańska, E. (2026). Cut resistance of coated structures with different geometries: an unsupervised machine learning approach. AUTEX Research Journal, 26(1). https://doi.org/10.1515/aut-2025-0109
Vancouver
Panskyi T, Korzeniewska E, Kropidłowska P, Irzmańska E. Cut resistance of coated structures with different geometries: an unsupervised machine learning approach. AUTEX Research Journal. 2026;26(1). doi:10.1515/aut-2025-0109
BibTeX
@article{Panskyi2026,
author = {Panskyi, Taras and Korzeniewska, Ewa and Kropidłowska, Paulina and Irzmańska, Emilia},
title = {Cut resistance of coated structures with different geometries: an unsupervised machine learning approach},
journal = {AUTEX Research Journal},
year = {2026},
volume = {26},
number = {1},
doi = {10.1515/aut-2025-0109}
}
EUVIMED