EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Application of Six Sigma Using DMAIC Methodology in the Process of Product Quality Control in Metallurgical Operation

Lenka Girmanová, Marek Šolc, Juraj Kliment, Adriana Divoková, Vojtech Mikloš

Acta Technologica Agriculturae · 20.12.2017 · 20 (4) · 104-109

DOI: 10.1515/ata-2017-0020 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Technologica Agriculturae, online erschienen am 21.12.2017. Verfasst von Lenka Girmanová und 4 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Six Sigma DMAIC can be considered a guide for problem solving and product or process improvement. The majority of companies start to implement Six Sigma using the DMAIC methodology. The paper deals with application of Six Sigma using the DMAIC methodology in the process of product quality control. The case study is oriented on the field of metallurgical operations. The goal of the Six Sigma project was to ensure the required metallurgic product quality and to avoid an increase in internal costs associated with poor product quality. In this case study, a variety of tools and techniques like flow chart, histogram, Pareto diagram, analysis of FMEA (Failure Mode and Effect Analysis) data, cause and effect diagram, logical analysis was used. The Sigma level has improved by approximately 13%. The achieved improvements have helped to reduce the quantity of defective products and the processing costs (technology for re-adjusting). Benefits resulting from the DMAIC implementation can be divided into three levels: the qualitative, economic and safety level.

Zitieren

APA

Girmanová, L., Šolc, M., Kliment, J., Divoková, A., & Mikloš, V. (2017). Application of Six Sigma Using DMAIC Methodology in the Process of Product Quality Control in Metallurgical Operation. Acta Technologica Agriculturae, 20(4), 104-109. https://doi.org/10.1515/ata-2017-0020

Vancouver

Girmanová L, Šolc M, Kliment J, Divoková A, Mikloš V. Application of Six Sigma Using DMAIC Methodology in the Process of Product Quality Control in Metallurgical Operation. Acta Technologica Agriculturae. 2017;20(4):104-109. doi:10.1515/ata-2017-0020

BibTeX
@article{Girmanov2017,
  author = {Girmanová, Lenka and Šolc, Marek and Kliment, Juraj and Divoková, Adriana and Mikloš, Vojtech},
  title = {Application of Six Sigma Using DMAIC Methodology in the Process of Product Quality Control in Metallurgical Operation},
  journal = {Acta Technologica Agriculturae},
  year = {2017},
  volume = {20},
  number = {4},
  pages = {104--109},
  doi = {10.1515/ata-2017-0020}
}
Kostenlos starten →