EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Routing Corners of Building Structures – by the Method of Vector Addition – Measured with RTN GNSS Surveying Technology

Robert Krzyżek

Artificial Satellites · 2015

DOI: 10.1515/arsa-2015-0015 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Artificial Satellites, 2015. Verfasst von Robert Krzyżek. Die Arbeit wurde bisher 5-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical realtime measurements using indirect methods (intersection of straight lines or a point on a straight line), we obtain a building structure (a building) which is largely deformed. This distortion is due to the inconsistency of the actual dimensions of the building (tie distances) relative to the obtained measurement results. In order to eliminate these discrepancies, and thus to ensure full consistency of the building geometric structure, an innovative solution was applied - the method of vector addition - to modify the linear values (tie distances) of the external face of the building walls. A separate research problem tackled in the article, although not yet fully solved, is the issue of coordinates of corners of a building obtained after the application of the method of vector addition.

Zitieren

APA

Krzyżek, R. (2015). Routing Corners of Building Structures – by the Method of Vector Addition – Measured with RTN GNSS Surveying Technology. Artificial Satellites. https://doi.org/10.1515/arsa-2015-0015

Vancouver

Krzyżek R. Routing Corners of Building Structures – by the Method of Vector Addition – Measured with RTN GNSS Surveying Technology. Artificial Satellites. 2015. doi:10.1515/arsa-2015-0015

BibTeX
@article{Krzyek2015,
  author = {Krzyżek, Robert},
  title = {Routing Corners of Building Structures – by the Method of Vector Addition – Measured with RTN GNSS Surveying Technology},
  journal = {Artificial Satellites},
  year = {2015},
  doi = {10.1515/arsa-2015-0015}
}
Kostenlos starten →