Measurement of Drilling Fluid Rheology and Modeling of Thixotropic Behavior
Applied Rheology · 01.03.2019 · 29 (1) · 1-11
DOI: 10.1515/arh-2019-0001 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Rheology, online erschienen am 16.03.2019. Verfasst von Hans Joakim Skadsem und 2 weiteren Autor:innen. Die Arbeit wurde bisher 63-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Drilling fluids perform a number of important functions during a drilling operation, including that of lifting drilled cuttings to the surface and balancing formation pressures. Drilling fluids are usually designed to be structured fluids exhibiting shear thinning and yield stress behavior, and most drilling fluids also exhibit thixotropy. Accurate modeling of drilling fluid rheology is necessary for predicting friction pressure losses in the wellbore while circulating, the pump pressure needed to resume circulation after a static period, and how the fluid rheology evolves with time while in static or near-static conditions. Although modeling the flow of thixotropic fluids in realistic geometries is still a formidable future challenge to be solved, considerable insights can still be gained by studying the viscometric flows of such fluids. We report a detailed rheological characterization of a water-based drilling fluid and an invert emulsion oilbased drilling fluid. The micro structure responsible for thixotropy is different in these fluids which results in different thixotropic responses. Measurements are primarily focused at transient responses to step changes in shear rate, but cover also steady state flow curves and stress overshoots during start-up of flow. We analyze the shear rate step change measurements using a structural kinetics thixotropy model.
Zitieren
APA
Skadsem, H. J., Leulseged, A., & Cayeux, E. (2019). Measurement of Drilling Fluid Rheology and Modeling of Thixotropic Behavior. Applied Rheology, 29(1), 1-11. https://doi.org/10.1515/arh-2019-0001
Vancouver
Skadsem HJ, Leulseged A, Cayeux E. Measurement of Drilling Fluid Rheology and Modeling of Thixotropic Behavior. Applied Rheology. 2019;29(1):1-11. doi:10.1515/arh-2019-0001
BibTeX
@article{Skadsem2019,
author = {Skadsem, Hans Joakim and Leulseged, Amare and Cayeux, Eric},
title = {Measurement of Drilling Fluid Rheology and Modeling of Thixotropic Behavior},
journal = {Applied Rheology},
year = {2019},
volume = {29},
number = {1},
pages = {1--11},
doi = {10.1515/arh-2019-0001}
}
EUVIMED