Improving insulation and energy efficiency in arid climate buildings with palm fiber-reinforced adobe: impact on thermal and mechanical properties
Journal of Thermal Engineering · 2026 · 427-440
DOI: 10.14744/thermal.0001034 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Thermal Engineering, 2026. Verfasst von Abdalkader BASSOUD und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
Improving the thermal insulation of contemporary cement buildings is a significant challenge, particularly in desert environments subject to high temperatures. Adobe, a raw earth-based material, represents a practical solution due to its natural thermal properties. However, its low mechanical strength, particularly in bending, limits its integration into modern construction. This study demonstrates that a 13 cm layer of adobe reinforced with palm fibers, used as ceiling insulation, improves the thermal insulation of the building by approximately 133%, while reducing annual energy consumption by up to 53%. Furthermore, the impact of the length and dosage of palm fibers on the mechanical and thermal properties of adobe was examined through a series of tests. Four dosages (0.25%, 0.50%, 0.75% and 1% by weight) and four fiber lengths (25 mm, 50 mm, 75 mm and 100 mm) were tested. The results reveal that concentrations between 0.5% and 1% offer the best performance. In particular, the 50 mm fibers at 0.5% increased the compressive strength by about 20%, while the 75 mm fibers at 1% improved the flexural strength by up to 45%, reaching 1.70 MPa. Cite this article
Zitieren
APA
BASSOUD, A., BADA, A., KHELAFI, H., MOKHTARI, A. M., MOULAY-ALI, A., & IDDER, A. (2026). Improving insulation and energy efficiency in arid climate buildings with palm fiber-reinforced adobe: impact on thermal and mechanical properties. Journal of Thermal Engineering, 427-440. https://doi.org/10.14744/thermal.0001034
Vancouver
BASSOUD A, BADA A, KHELAFI H, MOKHTARI AM, MOULAY-ALI A, IDDER A. Improving insulation and energy efficiency in arid climate buildings with palm fiber-reinforced adobe: impact on thermal and mechanical properties. Journal of Thermal Engineering. 2026:427-440. doi:10.14744/thermal.0001034
BibTeX
@article{BASSOUD2026,
author = {BASSOUD, Abdalkader and BADA, Abdalmalek and KHELAFI, Hamid and MOKHTARI, Abderahmane Mejedoub and MOULAY-ALI, Abderrahmane and IDDER, Abdelghani},
title = {Improving insulation and energy efficiency in arid climate buildings with palm fiber-reinforced adobe: impact on thermal and mechanical properties},
journal = {Journal of Thermal Engineering},
year = {2026},
pages = {427--440},
doi = {10.14744/thermal.0001034}
}
EUVIMED