EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of Friction and Wear Characteristics of AISI 1055 with Modified Neem Oil as Engine Lubricant in Four-Stroke SI Engines

Addihalli Ramegowda Girish, Yadavarahally Manjuanth Shashidhara

The Archives of Automotive Engineering – Archiwum Motoryzacji · 30.06.2026 · 112 (2) · 5-22

DOI: 10.14669/am/204663 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Archives of Automotive Engineering – Archiwum Motoryzacji, online erschienen am 30.06.2026. Verfasst von Addihalli Ramegowda Girish und 1 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper explores the use of neem oil as a lubricant for petrol engines. Raw neem oil undergoes a two-step esterification process to produce Neem Trimethylolpropane Ester (NTMPE). The engine used for testing is an air-cooled, four-stroke, single-cylinder petrol engine with a power output of 1.3 kW at 4200 rpm. Various blends of mineral oil (petroleum oil) and NTMPE are employed as lubricants during the trials. The engine is tested under varying loads, and the performance and emissions of these blends are compared to those achieved with mineral oil. The results indicate that using the NTMPE 20-MO 80 blend instead of mineral oil leads to a 10% reduction in fuel consumption, a 9% increase in thermal efficiency, and a slight improvement in mechanical efficiency. Additionally, the engine running on the NTMPE 20-MO 80 blend produces approximately 10% less carbon monoxide and an 8% reduction in unburnt hydrocarbon concentration compared to when using a petroleum-based lubricant. Tribological tests on NTMPE 20-MO 80 are conducted using a pin-on-disc tribometer with AISI 1055 carbon steel. The friction and wear behavior with modified vegetable oil lubrication are compared to results obtained with mineral oil. Additionally, images of the worn pin surfaces are captured using a scanning electron microscope (SEM). SEM surface analysis shows that NTMPE provides better lubrication than mineral oil (SAE 20W40), leading to an approximate 8% reduction in the friction coefficient and a 5% decrease in wear. The study was a low-power engine. In order to ascertain the variability of Neem Trimethylolpropane Ester (NTMPE), more study should be conducted using a typical engine, e.g., a car engine.

Zitieren

APA

Girish, A. R., & Shashidhara, Y. M. (2026). Study of Friction and Wear Characteristics of AISI 1055 with Modified Neem Oil as Engine Lubricant in Four-Stroke SI Engines. The Archives of Automotive Engineering – Archiwum Motoryzacji, 112(2), 5-22. https://doi.org/10.14669/am/204663

Vancouver

Girish AR, Shashidhara YM. Study of Friction and Wear Characteristics of AISI 1055 with Modified Neem Oil as Engine Lubricant in Four-Stroke SI Engines. The Archives of Automotive Engineering – Archiwum Motoryzacji. 2026;112(2):5-22. doi:10.14669/am/204663

BibTeX
@article{Girish2026,
  author = {Girish, Addihalli Ramegowda and Shashidhara, Yadavarahally Manjuanth},
  title = {Study of Friction and Wear Characteristics of AISI 1055 with Modified Neem Oil as Engine Lubricant in Four-Stroke SI Engines},
  journal = {The Archives of Automotive Engineering – Archiwum Motoryzacji},
  year = {2026},
  volume = {112},
  number = {2},
  pages = {5--22},
  doi = {10.14669/am/204663}
}
Kostenlos starten →