A Data-Driven Multi-Objective Optimization Framework for Rear-End Crash Compatibility Design of Truck Rear Underrun Protection Devices
International Journal of Advanced Computer Science and Applications · 2026 · 17 (10)
DOI: 10.14569/ijacsa.2026.0171077 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Advanced Computer Science and Applications, 2026. Verfasst von Yansong Dai und 4 weiteren Autor:innen.
Abstract (Originalsprache)
To mitigate underride risks in passenger car–truck rear-end collisions caused by mismatches in vehicle mass, structural stiffness, and height, this study proposes a surrogate model-assisted multi-objective optimization framework for rear underride protection device design. A full-overlap passenger car–truck crash model was first established using explicit dynamic finite element analysis and validated against the static loading and dynamic barrier impact requirements of GB 11567-2017. The numerical reliability of the full-vehicle model was further assessed through energy balance, hourglass energy, and added mass ratio. A crash compatibility evaluation framework was then developed from three aspects: energy distribution, structural intrusion, and vehicle dynamic response. RUPD energy absorption ratio, maximum intrusion of the passenger car front longitudinal beam, and peak longitudinal acceleration at the lower B-pillar were selected as optimization responses, while crossbeam thickness, ground clearance, and longitudinal installation distance were considered as design variables. Optimal Latin hypercube sampling and Kriging surrogate modeling were combined with the NSGA-II algorithm to obtain Pareto-optimal designs. Compared with the baseline design, the optimal solution increased the RUPD energy absorption ratio from 26.3 percent to 33.8 percent and reduced maximum longitudinal beam intrusion from 173 mm to 117 mm, representing a 32.4 percent reduction. The results demonstrate that appropriate coordination of RUPD stiffness and geometric configuration can improve energy distribution and load transfer, thereby reducing underride risk and enhancing crash compatibility.
Zitieren
APA
Dai, Y., Zhao, X., Ma, Y., Wang, C., & Nie, H. (2026). A Data-Driven Multi-Objective Optimization Framework for Rear-End Crash Compatibility Design of Truck Rear Underrun Protection Devices. International Journal of Advanced Computer Science and Applications, 17(10). https://doi.org/10.14569/ijacsa.2026.0171077
Vancouver
Dai Y, Zhao X, Ma Y, Wang C, Nie H. A Data-Driven Multi-Objective Optimization Framework for Rear-End Crash Compatibility Design of Truck Rear Underrun Protection Devices. International Journal of Advanced Computer Science and Applications. 2026;17(10). doi:10.14569/ijacsa.2026.0171077
BibTeX
@article{Dai2026,
author = {Dai, Yansong and Zhao, Xiao and Ma, Yidi and Wang, Cong and Nie, Hongrui},
title = {A Data-Driven Multi-Objective Optimization Framework for Rear-End Crash Compatibility Design of Truck Rear Underrun Protection Devices},
journal = {International Journal of Advanced Computer Science and Applications},
year = {2026},
volume = {17},
number = {10},
doi = {10.14569/ijacsa.2026.0171077}
}
EUVIMED