EUVIMEDEUVIMED entdecken
Crossref

The effect of the speed of movement of the laser cutting head during processing of the 12X18H10T alloy on the quality of the resulting surface

N. Yu. Kapalin, O. O. Berdnikov, D. S. Rechenko, B. A. Lopatin

Bulletin of the South Ural State University series "Mechanical engineering industry" · 2026 · 26 (1) · 78-86

DOI: 10.14529/engin260107 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bulletin of the South Ural State University series "Mechanical engineering industry", 2026. Verfasst von N. Yu. Kapalin und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of the speed of movement of a laser cutting head during processing of a 12X18H10T alloy on the quality of the formed cutting surface and the thickness of the modified layer (IC) is investigated. The experiments were carried out on a DMG LASERTEC 20 installation using nitrogen as a protective and blowing gas. Two experimental cycles were performed at laser radiation powers of 1300 and 1400 watts. In each cycle, six samples were processed with a change in the speed of movement of the laser cutting head in the range of 200–700 mm/min at fixed values of pulse frequency, gas pressure and focal length. The surface quality was assessed according to the roughness parameter Ra, and the thermal effect was carried out according to the thickness of the IC h. It is established that the speed of movement of the laser cutting head has a nonlinear effect on the roughness of the treated surface and the depth of the thermal treatment, as well as determines the boundary of stable cutting of the material.

Zitieren

APA

Kapalin, N. Y., Berdnikov, O. O., Rechenko, D. S., & Lopatin, B. A. (2026). The effect of the speed of movement of the laser cutting head during processing of the 12X18H10T alloy on the quality of the resulting surface. Bulletin of the South Ural State University series "Mechanical engineering industry", 26(1), 78-86. https://doi.org/10.14529/engin260107

Vancouver

Kapalin NY, Berdnikov OO, Rechenko DS, Lopatin BA. The effect of the speed of movement of the laser cutting head during processing of the 12X18H10T alloy on the quality of the resulting surface. Bulletin of the South Ural State University series "Mechanical engineering industry". 2026;26(1):78-86. doi:10.14529/engin260107

BibTeX
@article{Kapalin2026,
  author = {Kapalin, N. Yu. and Berdnikov, O. O. and Rechenko, D. S. and Lopatin, B. A.},
  title = {The effect of the speed of movement of the laser cutting head during processing of the 12X18H10T alloy on the quality of the resulting surface},
  journal = {Bulletin of the South Ural State University series "Mechanical engineering industry"},
  year = {2026},
  volume = {26},
  number = {1},
  pages = {78--86},
  doi = {10.14529/engin260107}
}
Kostenlos starten →