EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Modeling the Influence of Nitrogen Concentration on Optical Gain Performance in Gallium Nitride Arsenide/Gallium Arsenide Quantum Wells Vertical-cavity Surface-emitting Lasers

Amanj L. Shafiq, Faten A. Chaqmaqchee, Mohammad Gh. Faraj

ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY · 14.04.2026 · 14 (1) · 192-201

DOI: 10.14500/aro.12716 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY, online erschienen am 14.04.2026. Verfasst von Amanj L. Shafiq und 2 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of nitrogen (N) concentration on the optical and gain characteristics of Gallium Arsenide (GaAs)/gallium arsenide (GaAs) quantum wells (QWs) based vertical-cavity surface-emitting lasers (VCSELs) using MATLAB simulations. Numerical simulations were performed how varying N content affects cavity design and optical confinement properties. The stopband behavior and resonant wavelength shift were analyzed through reflectivity spectra for different N concentrations. The results reveal a red shift in the resonance wavelength and redistribution of the electric field intensity within the cavity as the N concentration increases. Higher N concentrations reduce mirror losses. However, excessive N incorporation introduces scattering and interface imperfections, leading to increased internal losses. In addition, an increase in N percentage results in reduced optical confinement factor and material gain decrease, indicating a lower overlap between the optical field and the active area. Both the threshold density and transparency carrier density were observed to rise with N addition, implying a decrease in recombination performance. Reflection-mode spectra confirm a red shift and a reduction in gain peak with higher N content. This analysis focused on a critical design of GaNAs VCSEL structure, which makes a distinction between engineering index profiles for optimal gain overlap and adjusting the optical path length for spectral control. A N concentration in the range of 1–2% provides the optimal balance along gain enhancement, optical confinement, loss minimization, and reflection gain, which are (0.11, 0.099), (175 cm−1, 162 cm−1), and (20.26 dB, 19.66 dB), respectively, thereby providing the overall performance of GaNAs/GaAs QWsVCSELs.

Zitieren

APA

Shafiq, A. L., Chaqmaqchee, F. A., & Faraj, M. G. (2026). Modeling the Influence of Nitrogen Concentration on Optical Gain Performance in Gallium Nitride Arsenide/Gallium Arsenide Quantum Wells Vertical-cavity Surface-emitting Lasers. ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY, 14(1), 192-201. https://doi.org/10.14500/aro.12716

Vancouver

Shafiq AL, Chaqmaqchee FA, Faraj MG. Modeling the Influence of Nitrogen Concentration on Optical Gain Performance in Gallium Nitride Arsenide/Gallium Arsenide Quantum Wells Vertical-cavity Surface-emitting Lasers. ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY. 2026;14(1):192-201. doi:10.14500/aro.12716

BibTeX
@article{Shafiq2026,
  author = {Shafiq, Amanj L. and Chaqmaqchee, Faten A. and Faraj, Mohammad Gh.},
  title = {Modeling the Influence of Nitrogen Concentration on Optical Gain Performance in Gallium Nitride Arsenide/Gallium Arsenide Quantum Wells Vertical-cavity Surface-emitting Lasers},
  journal = {ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY},
  year = {2026},
  volume = {14},
  number = {1},
  pages = {192--201},
  doi = {10.14500/aro.12716}
}
Kostenlos starten →