EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamic modeling and multi-criteria optimization of a pressure controller in a water supply system

Ivan A. Danilushkin, Sergey A. Kolpashchikov, Yulia O. Savelyeva

Vestnik of Samara State Technical University. Technical Sciences Series · 28.04.2026 · 34 (1) · 112-127

DOI: 10.14498/tech.2026.1.6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vestnik of Samara State Technical University. Technical Sciences Series, online erschienen am 28.04.2026. Verfasst von Ivan A. Danilushkin und 2 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper addresses the problem of parametric tuning of a pressure controller in a water supply system equipped with a variable-frequency drive for the pump unit. Dynamic models of the plant and of the closed-loop control system are proposed, aimed at iterative optimization of controller parameters. The water supply model is based on the equations of unsteady hydraulic balance, taking into account flow inertia and the accumulation capacity of the pipeline. Model parameters are determined from the performance characteristics of the pumping unit and the design documentation of the pipeline network. Based on the proposed mathematical framework, a structural scheme of the closed-loop pressure control system is developed, including a model of the frequency converter with a limitation on the rate of change of rotational speed. The discrete-time nature of the control signal is also taken into account.A set of integral performance indices is formulated, whose combination ensures the desired transient response characteristics of the control system. The pressure control system model is implemented in a numerical simulation environment for nonlinear dynamic systems. A procedure for controller parameter tuning using simulation-based optimization is described. Numerical simulation of transient processes is performed, and controller parameters are optimized using a weighted sum of integral performance indices for a specific case study. The adopted performance criteria ensure transient responses that satisfy prescribed constraints on both the controlled variable and the control signal. It is shown that accounting for load dynamics affects the control signal profile, overshoot, and response speed. The use of a weighted sum of criteria makes it possible to simultaneously consider response speed requirements and constraints on the control action within a unified optimization framework.The proposed approach can be applied to the design and analysis of automatic pressure control systems in water distribution networks.

Zitieren

APA

Danilushkin, I. A., Kolpashchikov, S. A., & Savelyeva, Y. O. (2026). Dynamic modeling and multi-criteria optimization of a pressure controller in a water supply system. Vestnik of Samara State Technical University. Technical Sciences Series, 34(1), 112-127. https://doi.org/10.14498/tech.2026.1.6

Vancouver

Danilushkin IA, Kolpashchikov SA, Savelyeva YO. Dynamic modeling and multi-criteria optimization of a pressure controller in a water supply system. Vestnik of Samara State Technical University. Technical Sciences Series. 2026;34(1):112-127. doi:10.14498/tech.2026.1.6

BibTeX
@article{Danilushkin2026,
  author = {Danilushkin, Ivan A. and Kolpashchikov, Sergey A. and Savelyeva, Yulia O.},
  title = {Dynamic modeling and multi-criteria optimization of a pressure controller in a water supply system},
  journal = {Vestnik of Samara State Technical University. Technical Sciences Series},
  year = {2026},
  volume = {34},
  number = {1},
  pages = {112--127},
  doi = {10.14498/tech.2026.1.6}
}
Kostenlos starten →