EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Optimization design and operating parameters of induction heat-ing system for hardening

Aleksey V. Pavlushin

Vestnik of Samara State Technical University. Technical Sciences Series · 2021

DOI: 10.14498/tech.2021.3.2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vestnik of Samara State Technical University. Technical Sciences Series, 2021. Verfasst von Aleksey V. Pavlushin. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper deals with the problem of optimizing the design and operating parameters of an induction heating system for surface hardening of a steel stepped shaft. The problem of optimal design of an inductor is formulated based on a nonlinear two-dimensional numerical model of coupled electromagnetic and temperature fields, developed in the ANSYS Mechanical APDL software. Alternance method of parametric optimization of systems with distributed parameters is used to optimize induction hardening system. MATLAB software has been used for developing parametric optimization subroutine, which was incorporated into the numerical ANSYS model to simulate a process of induction heating. Commonly used a multi-turn solenoid-style coil fabricated from rectangular copper tubing has been used as a hardening inductor. Besides that, an application of profiled copper turns has been investigated. Optimization of induction hardening system described above allows one to substantially improve heating uniformity and enhance metallurgical characteristics of as-hardened stepped shaft. Localized temperature surplus at an upper diameter shoulder has been minimized. At the same time, sufficient austenitization in the fillet area near stepped region (diameter transition) has been obtained.

Zitieren

APA

Pavlushin, A. V. (2021). Optimization design and operating parameters of induction heat-ing system for hardening. Vestnik of Samara State Technical University. Technical Sciences Series. https://doi.org/10.14498/tech.2021.3.2

Vancouver

Pavlushin AV. Optimization design and operating parameters of induction heat-ing system for hardening. Vestnik of Samara State Technical University. Technical Sciences Series. 2021. doi:10.14498/tech.2021.3.2

BibTeX
@article{Pavlushin2021,
  author = {Pavlushin, Aleksey V.},
  title = {Optimization design and operating parameters of induction heat-ing system for hardening},
  journal = {Vestnik of Samara State Technical University. Technical Sciences Series},
  year = {2021},
  doi = {10.14498/tech.2021.3.2}
}
Kostenlos starten →