EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Correction of the static characteristic of a frequency converter to reduce the amplitudes of resonance vibrations of the vibrating table

Alexander S. Vedernikov, Dmitry I. Dunaev

Vestnik of Samara State Technical University. Technical Sciences Series · 2021

DOI: 10.14498/tech.2021.2.8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vestnik of Samara State Technical University. Technical Sciences Series, 2021. Verfasst von Alexander S. Vedernikov und 1 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is known that vibration systems of directional vibrations based on asynchronous vibration motors are currently widely used in practice, but at the same time they have a significant drawback - a sharp increase in vibration amplitudes when passing through the resonance zone at the time of acceleration and deceleration of vibration motors, which negatively affects their operation. The article discusses a vibration table with two unbalanced asynchronous vibration motors. The calculation scheme and equations of motion of such a vibration system are presented. It is shown that the vibration table as a control object is an oscillatory link with a pronounced resonant frequency. The equations of motion of asynchronous vibration motors with scalar frequency control are given. A structural diagram of a vibration table with unbalanced exciters has been developed, the modeling of which made it possible to determine the amplitudes of resonant oscillations. It is proposed to apply correction of the static characteristics of the frequency converter, which connects the effective value of the output voltage with the frequency, to reduce the resonance amplitudes. Equations of the desired static characteristics of the inverter and analytical dependences for calculating the necessary coefficients for its implementation are given. A computational model has been developed that makes it possible to take into account the effect of the corrected static characteristic of the frequency converter on the operation of the vibrating table at the stages of acceleration and deceleration. The results of computer simulation are given, convincingly showing that the correction of the static characteristics of the inverter is an effective means of reducing the amplitudes of resonant oscillations. It is shown that modern frequency converters have functionality that makes it easy to correct the dependence of the effective value of the output voltage on the frequency. The need to adjust the static characteristics of the inverter for a specific type of product tested on the vibration table is noted.

Zitieren

APA

Vedernikov, A. S., & Dunaev, D. I. (2021). Correction of the static characteristic of a frequency converter to reduce the amplitudes of resonance vibrations of the vibrating table. Vestnik of Samara State Technical University. Technical Sciences Series. https://doi.org/10.14498/tech.2021.2.8

Vancouver

Vedernikov AS, Dunaev DI. Correction of the static characteristic of a frequency converter to reduce the amplitudes of resonance vibrations of the vibrating table. Vestnik of Samara State Technical University. Technical Sciences Series. 2021. doi:10.14498/tech.2021.2.8

BibTeX
@article{Vedernikov2021,
  author = {Vedernikov, Alexander S. and Dunaev, Dmitry I.},
  title = {Correction of the static characteristic of a frequency converter to reduce the amplitudes of resonance vibrations of the vibrating table},
  journal = {Vestnik of Samara State Technical University. Technical Sciences Series},
  year = {2021},
  doi = {10.14498/tech.2021.2.8}
}
Kostenlos starten →