EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Analysis of the Instantaneous Center of Rotation of a Six-Bar Mechanism Using Nodal Coordinates

Neider Nadid Romero Núñez, Gonzalo Moreno Contreras, Rafael Villalba González, Daniel Martins

Tecnura · 30.06.2026 · 30 (88) · 4-18

DOI: 10.14483/22487638.23730 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tecnura, online erschienen am 30.06.2026. Verfasst von Neider Nadid Romero Núñez und 3 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

Knowledge of the instantaneous center associated with two bodies in a mechanism is important for both analysis and synthesis, because it can simplify velocity and acceleration analysis. Moreover, accurate determination of the instantaneous center position is a key requirement for synthesis in many practical applications. The purpose of this work is to propose an analytical method for calculating the instantaneous center of rotation of a floating link in a six-bar mechanism with respect to the fixed link. Methodology: The proposed procedure consists of the following steps. First, the variables representing the mechanism dimensions are defined. Unlike traditional approaches, this work uses initial nodal coordinates. The constraint equations are then formulated using both the current and initial nodal coordinates. Next, the Levenberg-Marquardt method is applied to solve the constraint equations robustly. Finally, the kinematic constraint equations for the instantaneous centers are established using the Aronhold-Kennedy theorem and solved to determine the coordinates of the desired instantaneous center.

Results

Using nodal coordinates and the Aronhold-Kennedy theorem, a procedure was developed to determine the instantaneous center of rotation of a link with respect to the fixed link of a six-bar mechanism. The proposed method is sufficiently robust for use in optimal synthesis processes, which will be addressed in future work.

Conclusions

A method was developed to determine the instantaneous center in a six-bar mechanism using nodal coordinates. The method was validated by implementing the proposed procedure in a mechanism with arbitrary dimensions and comparing the results with those obtained using GIM (Geometric Interactive Method).

Zitieren

APA

Núñez, N. N. R., Contreras, G. M., González, R. V., & Martins, D. (2026). Analysis of the Instantaneous Center of Rotation of a Six-Bar Mechanism Using Nodal Coordinates. Tecnura, 30(88), 4-18. https://doi.org/10.14483/22487638.23730

Vancouver

Núñez NNR, Contreras GM, González RV, Martins D. Analysis of the Instantaneous Center of Rotation of a Six-Bar Mechanism Using Nodal Coordinates. Tecnura. 2026;30(88):4-18. doi:10.14483/22487638.23730

BibTeX
@article{Nez2026,
  author = {Núñez, Neider Nadid Romero and Contreras, Gonzalo Moreno and González, Rafael Villalba and Martins, Daniel},
  title = {Analysis of the Instantaneous Center of Rotation of a Six-Bar Mechanism Using Nodal Coordinates},
  journal = {Tecnura},
  year = {2026},
  volume = {30},
  number = {88},
  pages = {4--18},
  doi = {10.14483/22487638.23730}
}
Kostenlos starten →