EUVIMEDEUVIMED entdecken
Crossref

วเคราะหแรงกระทำตอกระดกทเบยภายใตความหนาและวสดทตางกน ภายในการผาตดเปลยนขอเขาเทยม โดยโปรแกรมจำลองทางคอมพวเตอร

Pruk Chaiyakit, Krittamuk Ompornnuwat, Natthapong Hongku, Pattanaphong Janphuang

Vajira Medical Journal: Journal of Urban Medicine · 23.12.2022

DOI: 10.14456/vmj.2022.41 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vajira Medical Journal: Journal of Urban Medicine, erschienen am 23.12.2022. Verfasst von Pruk Chaiyakit und 3 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitieren

Abstract (Originalsprache)

Objective

Proximal tibial bone resorption and osteolysis after total knee arthroplasty occur despite improved design and manufacturing processes. We utilized finite element analysis to study these phenomena.

Methods

We use SOLIDWORKS 2018 software to study stress and displacement of normal tibias and tibias implanted with a 4-mm-thick CoCr tibial tray (4mm-tray) or 2-mm-thick titanium alloy (2mm-tray). Under vertical loads of 1000 or 2000 N, the stress and displacement of both tibia tray models were analyzed. Stress on the supported proximal tibia 1 and 2 cm beneath the surface was analyzed and compared to stress in a normal tibia.

Results

Stress concentrated around the central region compared to the peripheral region in all models, which caused more deformation of the material in the central region. However, the 4mm-tray exhibited a more rigid construct compared to the 2mm-tray. Under any load, the 2mm-tray exhibited more tray deformation, with a central–peripheral deformation difference of approximately five times more than the deformation difference for the 4mm-tray. Moreover, stress on the peripheral region of the supported proximal tibia was only 18–22% of that of a normal bone for the 4mm-tray compared to 54–66% for the 2mm-tray.

Conclusion

Both tibial tray implant models exhibited some degree of stress shielding on the peripheral region of the supported proximal tibia. However, the greater modulus and thicker baseplate construct of the 4-mm CoCr tray exhibited a profound stress shielding effect. This stress shielding may correlate with a higher incidence of proximal tibia bone loss.

Schlagwörter

total knee arthroplastytibial traystress shieldingproximal tibiacobalt-chromium alloytitanium alloysimplant materialsbone stress distributionfinite element analysis

Zitieren

APA

Chaiyakit, P., Ompornnuwat, K., Hongku, N., & Janphuang, P. (2022). วเคราะหแรงกระทำตอกระดกทเบยภายใตความหนาและวสดทตางกน ภายในการผาตดเปลยนขอเขาเทยม โดยโปรแกรมจำลองทางคอมพวเตอร. Vajira Medical Journal: Journal of Urban Medicine. https://doi.org/10.14456/vmj.2022.41

Vancouver

Chaiyakit P, Ompornnuwat K, Hongku N, Janphuang P. วเคราะหแรงกระทำตอกระดกทเบยภายใตความหนาและวสดทตางกน ภายในการผาตดเปลยนขอเขาเทยม โดยโปรแกรมจำลองทางคอมพวเตอร. Vajira Medical Journal: Journal of Urban Medicine. 2022. doi:10.14456/vmj.2022.41

BibTeX
@article{Chaiyakit2022,
  author = {Chaiyakit, Pruk and Ompornnuwat, Krittamuk and Hongku, Natthapong and Janphuang, Pattanaphong},
  title = {วเคราะหแรงกระทำตอกระดกทเบยภายใตความหนาและวสดทตางกน ภายในการผาตดเปลยนขอเขาเทยม โดยโปรแกรมจำลองทางคอมพวเตอร},
  journal = {Vajira Medical Journal: Journal of Urban Medicine},
  year = {2022},
  doi = {10.14456/vmj.2022.41}
}
Kostenlos starten →