EUVIMEDEUVIMED entdecken
Crossref

Algorithm for Bone Remodelling Using FEM

Sontakan Luangviset, Attaporn Wisessint

Journal of Research and Applications in Mechanical Engineering · 01.01.2023

DOI: 10.14456/jrame.2023.14 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Research and Applications in Mechanical Engineering, erschienen am 01.01.2023. Verfasst von Sontakan Luangviset und 1 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To repair the injured area and adjust strength to meet the need of the human body, resorption and formation of bones can occur throughout the lifespan depending on the strain factor. An adaptation of the trabecular bone architecture is influenced by load characteristics and outside geometry according to Wolff's law theory. In this paper, a 2D square model of trabecular bone was simulated in finite element analysis (FEA) with varying triangular distribution in compressive load, and the architecture of the trabecular bone was then altered by adding and reducing the element in the direction of the strain based on bone remodelling behavior. Finally, the FEM results showed that the trabecular bone was redesigned and adjusted to have an architecture based on load characteristics and geometry, as described by Wolff's law. This study can be used to predict the architecture and the porosity of trabecular bone.

Schlagwörter

bone remodelingfinite element analysisbone modeling

Zitieren

APA

Luangviset, S., & Wisessint, A. (2023). Algorithm for Bone Remodelling Using FEM. Journal of Research and Applications in Mechanical Engineering. https://doi.org/10.14456/jrame.2023.14

Vancouver

Luangviset S, Wisessint A. Algorithm for Bone Remodelling Using FEM. Journal of Research and Applications in Mechanical Engineering. 2023. doi:10.14456/jrame.2023.14

BibTeX
@article{Luangviset2023,
  author = {Luangviset, Sontakan and Wisessint, Attaporn},
  title = {Algorithm for Bone Remodelling Using FEM},
  journal = {Journal of Research and Applications in Mechanical Engineering},
  year = {2023},
  doi = {10.14456/jrame.2023.14}
}
Kostenlos starten →