EUVIMEDEUVIMED entdecken
Crossref

การออกแบบและพฒนาระบบอบแหงแบบปมความรอนสำหรบเมลดพนธถวเหลอง

Arnon Saicomfu, Pinit Jirakkakul, Paphatsorn Wattanakulpakin, Wichai Opanukul, Tanapong Sanchum, Akkaparp Panpoom, Anucha Chaochot, Niruth Boonya

Thai Society of Agricultural Engineering Journal · 16.01.2023

DOI: 10.14456/255470 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thai Society of Agricultural Engineering Journal, erschienen am 16.01.2023. Verfasst von Arnon Saicomfu und 7 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitieren

Abstract (Originalsprache)

The design and development of the heat pump drying system aimed to reduce moisture in soybeans. This study was designed to scale the prototype of the drying chamber to 2.8 x 2.5 x 2.3 m (width x length x height). The heat pump system was designed to operate the motor compressor at 7 HP (380 V/3 Ph/50Hz) and using R-22 Refrigerant it has the cooling capacity and heating capacity were 16.5 kW and 15.5 kW respectively. The heat pump system testing for the soybean seeds drying was determined high pressure of refrigerant have 3 levels of 200 psi, 250 psi and 300 psi. The result showed that the temperature and relative humidity in the drying chamber ranged from 30 to 34°C; 38 to 40 %RH, 36 to 40°C; 35 to 38 %RH and 40 to 46°C; 32 to 36 %RH respectively. The high pressure of the 250psi refrigerant was the optimal high pressure for temperature and relative humidity control in the drying chamber for drying soybeans. In addition, the drying of soybean seeds, by testing 250 kg with the initial moisture content of soybeans 18% reduced to 11% wb. The drying time was about 5 to 6 hours. Moreover, an economic valuation assessment for investing the heat pump system for the soybean seeds drying showed that the cost of seeds drying production capacity at 20, 30, 40 and 50 tons/year was 3.65, 2.73, 2.28 and 2.0 baht.kgdry-1 respectively.

Schlagwörter

heat pump dryingsoybean seedsdrying chamber designR22 refrigerantmoisture content reductiondrying time

Zitieren

APA

Saicomfu, A., Jirakkakul, P., Wattanakulpakin, P., Opanukul, W., Sanchum, T., Panpoom, A., Chaochot, A., & Boonya, N. (2023). การออกแบบและพฒนาระบบอบแหงแบบปมความรอนสำหรบเมลดพนธถวเหลอง. Thai Society of Agricultural Engineering Journal. https://doi.org/10.14456/255470

Vancouver

Saicomfu A, Jirakkakul P, Wattanakulpakin P, Opanukul W, Sanchum T, Panpoom A, et al. การออกแบบและพฒนาระบบอบแหงแบบปมความรอนสำหรบเมลดพนธถวเหลอง. Thai Society of Agricultural Engineering Journal. 2023. doi:10.14456/255470

BibTeX
@article{Saicomfu2023,
  author = {Saicomfu, Arnon and Jirakkakul, Pinit and Wattanakulpakin, Paphatsorn and Opanukul, Wichai and Sanchum, Tanapong and Panpoom, Akkaparp and Chaochot, Anucha and Boonya, Niruth},
  title = {การออกแบบและพฒนาระบบอบแหงแบบปมความรอนสำหรบเมลดพนธถวเหลอง},
  journal = {Thai Society of Agricultural Engineering Journal},
  year = {2023},
  doi = {10.14456/255470}
}
Kostenlos starten →