Evaluation of Boron Combustion for Ducted Rocket Applications Using Condensed Product Analysis
Defence Science Journal · 26.03.2024 · 74 (2) · 278-287
DOI: 10.14429/dsj.74.18685 ↗Kurz gefasst
Fachartikel in der Zeitschrift Defence Science Journal, online erschienen am 26.03.2024. Verfasst von Syed Alay Hashim und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 2.5).
Abstract (Originalsprache)
Boron, a metalloid, produces high energy upon combustion. It is recommended as an ingredient for fuel or propellant in rocket propulsion, despite the challenge of extracting its full thermal energy. So far no one has claimed the complete energy conversion of boron upon combustion. On the other hand, the current propulsion system of the Meteor missile uses boron-loaded propellant. The boron-loaded propellant provides an approximately three-fold increase in specific impulse compared to conventional propellants. The present study focuses on boron-HTPB-based solid fuels impregnated with early ignited particles as additives, aiming to assess the combustion performance of boron particles. These additives are magnesium (Mg), titanium (Ti), and activated charcoal (C), and their effects are evaluated based on the residual active boron content in the condensed combustion products (burned residues). An economical tool commonly called stagnation flow or opposed flow burner (OFB) is used to deflagrate the fuel sample by means of pressurized oxygen gas. The condensed combustion products are examined using a field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential thermal analysis (DTA). Among the fuel combinations investigated here, magnesium has been found to be a good burning enhancer of boron, leaving the lowest active boron content (30%) in the burned-out residue. The current research aims to develop an efficient boron-containing solid fuel for hybrid propellant ducted rocket engine applications.
Zitieren
APA
Hashim, S. A., Karmakar, S., Roy, A., & Abubakar, M. (2024). Evaluation of Boron Combustion for Ducted Rocket Applications Using Condensed Product Analysis. Defence Science Journal, 74(2), 278-287. https://doi.org/10.14429/dsj.74.18685
Vancouver
Hashim SA, Karmakar S, Roy A, Abubakar M. Evaluation of Boron Combustion for Ducted Rocket Applications Using Condensed Product Analysis. Defence Science Journal. 2024;74(2):278-287. doi:10.14429/dsj.74.18685
BibTeX
@article{Hashim2024,
author = {Hashim, Syed Alay and Karmakar, Srinibas and Roy, Arnab and Abubakar, Muazu},
title = {Evaluation of Boron Combustion for Ducted Rocket Applications Using Condensed Product Analysis},
journal = {Defence Science Journal},
year = {2024},
volume = {74},
number = {2},
pages = {278--287},
doi = {10.14429/dsj.74.18685}
}
EUVIMED