Modelling, Simulation, and Geometrical Prototyping of a Three-Phase Brushless DC Motor for Drone Applications
Defence Science Journal · 27.10.2026 · 76 (6) · 763-774
DOI: 10.14429/dsj.20375 ↗Kurz gefasst
Fachartikel in der Zeitschrift Defence Science Journal, online erschienen am 27.10.2026. Verfasst von Harish Vishnu Gunjal und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 2.5).
Abstract (Originalsprache)
A drone, also known as a UAV (unmanned aerial vehicle), is an aircraft that flies without a pilot and is controlled remotely or autonomously. A drone is used for various applications, such as transportation, healthcare, and surveillance. This study presents the modelling, simulation, and prototyping of a three-phase outer-rotor Brushless DC (BLDC) motor for drone applications. A reference 5010-360 kV outer-rotor BLDC motor was modelled at a nominal DC voltage of 22.2 V using ANSYS RMxprt and Maxwell 2D. The modified design was developed through constrained parametric changes in stator dimensions, slot geometry, winding configuration, rotor length, magnet thickness and pole embrace while maintaining the 50 mm outer rotor diameter and 12-slot/14-pole configuration. The modified design significantly improved efficiency from 43.76 % to 65.79 % (~50 % increase) and rated torque from 0.348 Nm to 0.386 Nm (~10.7 % increase), while also reducing cogging torque from 0.002 Nm to 0.000045 Nm (~97.8 % reduction in loss). Magnetic field strength is also enhanced from 2.59 T to 3.52 T, the corresponding iron-core loss increased from 4.41 W to 7.61 W, indicating the need to consider localised magnetic saturation in the modified design. The results indicate that optimising electromagnetic design parameters can significantly improve BLDC motor performance for UAV applications. Finally, a geometric prototype of a modified BLDC motor has been generated on a Stratasys 3D printer using the amorphous plastic ASA (Acrylonitrile styrene acrylate) for improved analysis.
Zitieren
APA
Gunjal, H. V., Belokar, R. M., & Saggu, T. S. (2026). Modelling, Simulation, and Geometrical Prototyping of a Three-Phase Brushless DC Motor for Drone Applications. Defence Science Journal, 76(6), 763-774. https://doi.org/10.14429/dsj.20375
Vancouver
Gunjal HV, Belokar RM, Saggu TS. Modelling, Simulation, and Geometrical Prototyping of a Three-Phase Brushless DC Motor for Drone Applications. Defence Science Journal. 2026;76(6):763-774. doi:10.14429/dsj.20375
BibTeX
@article{Gunjal2026,
author = {Gunjal, Harish Vishnu and Belokar, Rajendra M. and Saggu, Tejinder Singh},
title = {Modelling, Simulation, and Geometrical Prototyping of a Three-Phase Brushless DC Motor for Drone Applications},
journal = {Defence Science Journal},
year = {2026},
volume = {76},
number = {6},
pages = {763--774},
doi = {10.14429/dsj.20375}
}
EUVIMED