EUVIMEDEUVIMED entdecken
Crossref

A method for creating twelve-node finite element meshes to ‎find the cutoff wave number for polygonal and circular ‎waveguides

K. Lekhana, Shivaram K.T

International Journal of Basic and Applied Sciences · 15.04.2025 · 14 (1) · 59-64

DOI: 10.14419/y9648s16 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Basic and Applied Sciences, online erschienen am 15.04.2025. Verfasst von K. Lekhana und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The numerical solution of the Helmholtz equation-driven electromagnetic waveguide eigenvalue issue is presented using the finite element ‎method. This work utilized a 2D automated 12-noded mesh generator, run with Maple 13, to produce a highly efficient, straightforward, and accurate higher-order technique for the current work. A transcendence automated discretization is constructed. Meshes with quadrilateral ‎elements are used for wave-guiding structures that are square, L-shaped, and unit-circular regions, but this explanation of the finite element ‎approach is sufficient for the purposes at hand. In any numerical simulation that uses the finite element approach, meshing procedures are ‎extremely important, the approach is shown for several waveguide configurations, and the results are compared to the most ‎reliable numerical or analytical results. Since there is no curvature loss, the results demonstrate that the proposed methodology is precise and ‎effective for producing finite element models of complex structures, this article provides a cutoff frequency determination using the Maple ‎program and commercial software analysis results are taken into account for the comparison, demonstrating that the computation results for ‎electromagnetic applications, this process can be used to obtain the most efficient energy transmission.

Zitieren

APA

Lekhana, K., & K.T, S. (2025). A method for creating twelve-node finite element meshes to ‎find the cutoff wave number for polygonal and circular ‎waveguides. International Journal of Basic and Applied Sciences, 14(1), 59-64. https://doi.org/10.14419/y9648s16

Vancouver

Lekhana K, K.T S. A method for creating twelve-node finite element meshes to ‎find the cutoff wave number for polygonal and circular ‎waveguides. International Journal of Basic and Applied Sciences. 2025;14(1):59-64. doi:10.14419/y9648s16

BibTeX
@article{Lekhana2025,
  author = {Lekhana, K. and K.T, Shivaram},
  title = {A method for creating twelve-node finite element meshes to ‎find the cutoff wave number for polygonal and circular ‎waveguides},
  journal = {International Journal of Basic and Applied Sciences},
  year = {2025},
  volume = {14},
  number = {1},
  pages = {59--64},
  doi = {10.14419/y9648s16}
}
Kostenlos starten →