Determination of Geoidal Undulation of Points Within the Federal University of Technology, Akure, Using Geometric Technique
International Journal of Advanced Geosciences · 14.03.2026 · 14 (1) · 30-36
DOI: 10.14419/m1y49p48 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Advanced Geosciences, online erschienen am 14.03.2026. Verfasst von Gafar Suara und 3 weiteren Autor:innen.
Abstract (Originalsprache)
This study determined the local geoidal undulation at thirty-one (31) points within the Federal University of Technology, Akure, using a geometric method. Before data collection, a two-peg test was performed on the Leica automatic level, resulting in a misclosure of 0.002 m, which verified the instrument’s suitability for precise levelling. Similarly, the Differential Global Positioning System (DGPS) receiver was checked for optimal performance. Orthometric heights were obtained through geodetic levelling observations using the height-of-instrument method, while ellipsoidal heights were measured with a Tersus DGPS receiver and processed with Geomatics Office software. Geoidal undulations were calculated as the difference between the ellipsoidal and orthometric heights. The resulting values were used to generate geoidal contour maps and a three-dimensional surface model in Surfer 11 software, enabling visualization of the spatial variation and slope characteristics of the study area. Validation of the results against previously established gravimetric geoidal undulations showed good agreement, with standard deviations and RMSE of 0.234 mm and 0.231 mm, respectively, demonstrating the reliability and accuracy of the geometric method for local geoid determination. As demonstrated in this study, the geometric technique's efficiency, low operational cost, and minimal data requirements make it a viable alternative for determining geoidal undulation in regions with similar terrain, particularly where gravimetric data are unavailable or financially restrictive.
Zitieren
APA
Suara, G., Akinola, A. O., Tifase, A. O., & Odeyinka, A. A. (2026). Determination of Geoidal Undulation of Points Within the Federal University of Technology, Akure, Using Geometric Technique. International Journal of Advanced Geosciences, 14(1), 30-36. https://doi.org/10.14419/m1y49p48
Vancouver
Suara G, Akinola AO, Tifase AO, Odeyinka AA. Determination of Geoidal Undulation of Points Within the Federal University of Technology, Akure, Using Geometric Technique. International Journal of Advanced Geosciences. 2026;14(1):30-36. doi:10.14419/m1y49p48
BibTeX
@article{Suara2026,
author = {Suara, Gafar and Akinola, Aminat O. and Tifase, Adeola O. and Odeyinka, Abdqudus A.},
title = {Determination of Geoidal Undulation of Points Within the Federal University of Technology, Akure, Using Geometric Technique},
journal = {International Journal of Advanced Geosciences},
year = {2026},
volume = {14},
number = {1},
pages = {30--36},
doi = {10.14419/m1y49p48}
}
EUVIMED