EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Analysis of the quality of dental prostheses printed by digital light-processing technology

Jae-Hong Kim, Ki-Baek Kim

Journal of Korean Acedemy of Dental Technology · 2020

DOI: 10.14347/jtd.2020.42.3.197 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Korean Acedemy of Dental Technology, 2020. Verfasst von Jae-Hong Kim und 1 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This study aimed to assess the quality of dental prostheses printed by digital lightprocessing (DLP) technology.

Methods

Ten experimental models were prepared.The ten specimens that were printed by DLP technology constituted the DLP group.The ten specimens that were produced in the same model by the casting method constituted the control group.The marginal gaps of the 20 specimens produced were measured.These gaps were measured by a silicon replica technique at two abutments of the specimen.Therefore, 20 marginal gaps were measured in each group.An independent sample t-test was performed to compare the marginal gaps measured in the two groups (α=0.05).

Results

According to the results of the measurement, there was a significant difference between the mean marginal gap of the control group (78.8 μm) and that of the DLP group (91.5 μm), p

Zitieren

APA

Kim, J., & Kim, K. (2020). Analysis of the quality of dental prostheses printed by digital light-processing technology. Journal of Korean Acedemy of Dental Technology. https://doi.org/10.14347/jtd.2020.42.3.197

Vancouver

Kim J, Kim K. Analysis of the quality of dental prostheses printed by digital light-processing technology. Journal of Korean Acedemy of Dental Technology. 2020. doi:10.14347/jtd.2020.42.3.197

BibTeX
@article{Kim2020,
  author = {Kim, Jae-Hong and Kim, Ki-Baek},
  title = {Analysis of the quality of dental prostheses printed by digital light-processing technology},
  journal = {Journal of Korean Acedemy of Dental Technology},
  year = {2020},
  doi = {10.14347/jtd.2020.42.3.197}
}
Kostenlos starten →