EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Feasibility of Fabricating Variable Density Phantoms Using 3D Printing for Quality Assurance (QA) in Radiotherapy

Se An Oh, Min Jeong Kim, Ji Su Kang, Hyeon Seok Hwang, Young Jin Kim, Seong Hoon Kim, Jae Won Park, Ji Woon Yea, Sung Kyu Kim

Progress in Medical Physics · 2017

DOI: 10.14316/pmp.2017.28.3.106 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Medical Physics, 2017. Verfasst von Se An Oh und 8 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea, Korea Foundation for the Advancement of Science and Creativity.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Corresponding author Sung Kyu Kim (skkim3@ynu.ac.kr) Tel: 82-53-620-3373 Fax: 82-53-624-3599 The variable density phantom fabricated with varying the infill values of 3D printer to provide more accurate dose verification of radiation treatments. A total of 20 samples of rectangular shape were fabricated by using the Finebot (AnyWorks; Korea) Z420 model (width×length×height=50 mm×50 mm×10 mm) varying the infill value from 5% to 100%. The samples were scanned with 1-mm thickness using a Philips Big Bore Brilliance CT Scanner (Philips Medical, Eindhoven, Netherlands). The average Hounsfield Unit (HU) measured by the region of interest (ROI) on the transversal CT images. The average HU and the infill values of the 3D printer measured through the 2D area profile measurement method exhibited a strong linear relationship (adjusted R-square=0.99563) in which the average HU changed from -926.8 to 36.7, while the infill values varied from 5% to 100%. This study showed the feasibility fabricating variable density phantoms using the 3D printer with FDM (Fused Deposition Modeling)-type and PLA (Poly Lactic Acid) materials.

Förderung

  • National Research Foundation of Korea
  • Korea Foundation for the Advancement of Science and Creativity

Zitieren

APA

Oh, S. A., Kim, M. J., Kang, J. S., Hwang, H. S., Kim, Y. J., Kim, S. H., Park, J. W., Yea, J. W., & Kim, S. K. (2017). Feasibility of Fabricating Variable Density Phantoms Using 3D Printing for Quality Assurance (QA) in Radiotherapy. Progress in Medical Physics. https://doi.org/10.14316/pmp.2017.28.3.106

Vancouver

Oh SA, Kim MJ, Kang JS, Hwang HS, Kim YJ, Kim SH, et al. Feasibility of Fabricating Variable Density Phantoms Using 3D Printing for Quality Assurance (QA) in Radiotherapy. Progress in Medical Physics. 2017. doi:10.14316/pmp.2017.28.3.106

BibTeX
@article{Oh2017,
  author = {Oh, Se An and Kim, Min Jeong and Kang, Ji Su and Hwang, Hyeon Seok and Kim, Young Jin and Kim, Seong Hoon and Park, Jae Won and Yea, Ji Woon and Kim, Sung Kyu},
  title = {Feasibility of Fabricating Variable Density Phantoms Using 3D Printing for Quality Assurance (QA) in Radiotherapy},
  journal = {Progress in Medical Physics},
  year = {2017},
  doi = {10.14316/pmp.2017.28.3.106}
}
Kostenlos starten →