EUVIMEDEUVIMED entdecken
Crossref

Measurement of Methane Combustion Products in Industrial Degassing Flares

Andrzej Ligienza, Mariusz Kastek, Krzysztof Firmanty, Jadwiga Holewa-Rataj, Mateusz Rataj, Sebastian Rzydzik

Pomiary Automatyka Robotyka · 22.06.2026 · 30 (2) · 81-87

DOI: 10.14313/par_260/81 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pomiary Automatyka Robotyka, erschienen am 22.06.2026. Verfasst von Andrzej Ligienza und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research paper presents a comprehensive study on measuring methane combustion products in industrial degassing flares, addressing critical environmental and regulatory compliance requirements in the oil and gas sector. The study was motivated by stringent new regulations, including the European Union’s Methane Regulation (2024/1787) and Oil & Gas Methane Partnership 2.0 (OGMP2.0) guidelines, which mandate a minimum 99% methane destruction efficiency for flares and require experimental determination of destruction coefficients. The authors investigated two complementary measurement techniques for determining flare combustion efficiency: direct gas sampling and passive Fourier Transform Infrared spectroscopy (pFTIR). The experimental work was conducted using an Esders degassing flare. The pFTIR method utilized a Mini HyperCam Telops imaging FTIR spectroradiometer. This remote sensing approach analyzed thermal radiation emitted by hot combustion gases, eliminating the need for physical access to hazardous flare locations. Both measurement techniques successfully verified high methane destruction efficiency exceeding the 99% regulatory threshold. The direct gas sampling method achieved a destruction efficiency of 99.09%, while the pFTIR approach demonstrated 99.77% efficiency. The relative difference between methods was minimal at 0.66%, indicating strong correlation and reliability.

Zitieren

APA

Ligienza, A., Kastek, M., Firmanty, K., Holewa-Rataj, J., Rataj, M., & Rzydzik, S. (2026). Measurement of Methane Combustion Products in Industrial Degassing Flares. Pomiary Automatyka Robotyka, 30(2), 81-87. https://doi.org/10.14313/par_260/81

Vancouver

Ligienza A, Kastek M, Firmanty K, Holewa-Rataj J, Rataj M, Rzydzik S. Measurement of Methane Combustion Products in Industrial Degassing Flares. Pomiary Automatyka Robotyka. 2026;30(2):81-87. doi:10.14313/par_260/81

BibTeX
@article{Ligienza2026,
  author = {Ligienza, Andrzej and Kastek, Mariusz and Firmanty, Krzysztof and Holewa-Rataj, Jadwiga and Rataj, Mateusz and Rzydzik, Sebastian},
  title = {Measurement of Methane Combustion Products in Industrial Degassing Flares},
  journal = {Pomiary Automatyka Robotyka},
  year = {2026},
  volume = {30},
  number = {2},
  pages = {81--87},
  doi = {10.14313/par_260/81}
}
Kostenlos starten →