Thermal Contrast Model for Optical Gas Imaging Performance Analysis
Pomiary Automatyka Robotyka · 27.03.2026 · 30 (1) · 65-69
DOI: 10.14313/par_259/65 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pomiary Automatyka Robotyka, erschienen am 27.03.2026. Verfasst von Robert Olbrycht.
Abstract (Originalsprache)
The paper presents numerical modelling of thermal contrast in optical gas imaging (OGI) applications. The physical temperature of an imaged gas plume may be either higher or lower than the background, and this difference is a necessary condition for detection. Depending on the actual thermal contrast between the plume and the background, the measured temperature difference will vary. Ideally, this contrast should be as large as possible to ensure clear plume visualization. In practice, however, one must adapt to real world conditions and be able to predict the expected measured temperature difference and compare it with the camera’s Noise Equivalent Temperature Difference (NETD) to estimate the signal to noise ratio. According to the results presented in this study, due to the combined effects of Planck’s law, the camera’s radiometric response, and gas absorption spectra, the measured thermal contrast strongly depends on the absolute physical temperatures of both the gas and the background—not only on the temperature difference between them.
Zitieren
APA
Olbrycht, R. (2026). Thermal Contrast Model for Optical Gas Imaging Performance Analysis. Pomiary Automatyka Robotyka, 30(1), 65-69. https://doi.org/10.14313/par_259/65
Vancouver
Olbrycht R. Thermal Contrast Model for Optical Gas Imaging Performance Analysis. Pomiary Automatyka Robotyka. 2026;30(1):65-69. doi:10.14313/par_259/65
BibTeX
@article{Olbrycht2026,
author = {Olbrycht, Robert},
title = {Thermal Contrast Model for Optical Gas Imaging Performance Analysis},
journal = {Pomiary Automatyka Robotyka},
year = {2026},
volume = {30},
number = {1},
pages = {65--69},
doi = {10.14313/par_259/65}
}
EUVIMED