EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of a core drilling rig drive

Vojtěch Dynybyl, František Starý, Josef Bradáč, Jiří David, Pavel Švec

Acta Polytechnica · 10.07.2026 · 66 (3) · 282-289

DOI: 10.14311/ap.2026.66.0282 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Polytechnica, online erschienen am 10.07.2026. Verfasst von Vojtěch Dynybyl und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper deals with the design of drives for a geological core drilling rig. This rig is a special case since it requires an electric drive instead of a hydraulic one. In addition, the modularity of the rig with a maximal module weight limitation of 50 kg is another challenge.In the case of the drilling head drive, the problem lies in the use of two different drilling bit materials, depending on the material to be drilled and the chosen tool diameter. This leads to a need for variable speed and torque of the drive. The stroke drive must be capable of traversing rapidly at 3 m min−1 during tool extraction and, in extreme cases, operating at zero speed during drilling.The first option considered was an asynchronous electric motor. However, due to its high weight and inability to maintain torque at zero speed, it was rejected. The second option considered was an EV motor, with the main advantage being its low weight. However, this option was also rejected as the motor is not compatible with the drill gearbox and it would require a custom-made gearbox, which would make the drill assembly too expensive. The last option considered was a servomotor. Its advantages, including easy PLC control and operating parameters sensing, outweigh its higher price.

Zitieren

APA

Dynybyl, V., Starý, F., Bradáč, J., David, J., & Švec, P. (2026). Design of a core drilling rig drive. Acta Polytechnica, 66(3), 282-289. https://doi.org/10.14311/ap.2026.66.0282

Vancouver

Dynybyl V, Starý F, Bradáč J, David J, Švec P. Design of a core drilling rig drive. Acta Polytechnica. 2026;66(3):282-289. doi:10.14311/ap.2026.66.0282

BibTeX
@article{Dynybyl2026,
  author = {Dynybyl, Vojtěch and Starý, František and Bradáč, Josef and David, Jiří and Švec, Pavel},
  title = {Design of a core drilling rig drive},
  journal = {Acta Polytechnica},
  year = {2026},
  volume = {66},
  number = {3},
  pages = {282--289},
  doi = {10.14311/ap.2026.66.0282}
}
Kostenlos starten →