EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Regression model of the extraction force of an automatic rifle cartridge case

Dinh Dung Tran, Martin Macko, Duc Hoan Tran, Thanh Loan To, František Racek

Acta Polytechnica · 16.03.2026 · 66 (1) · 109-116

DOI: 10.14311/ap.2026.66.0109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Polytechnica, online erschienen am 16.03.2026. Verfasst von Dinh Dung Tran und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reliable extraction of the cartridge case after firing is essential to the proper functioning of a gas-operated gun. This study presents a predictive model for the extraction force of a 7.62×39 mm steel cartridge case, based on the maximum chamber pressure and the contact friction coefficient (between the cartridge case and the chamber). A Central Composite Design (CCD) with two factors was used to generate the simulation data from finite element models developed in ANSYS. A reduced quadratic regression model was constructed and statistically validated, showing a high predictive capability (R2 = 0.969, adjusted R2 = 0.953). The model reveals that friction has a stronger influence on the extraction force than the maximum pressure, and that their interaction is non-linear. Experimental validation at the design centre, using a custom-built extraction test rig, yielded an average measured force of 39.10 N, closely matching the predicted value of 38.90 N (error = 0.51 %). The proposed model is a fast and reliable tool for the design and optimisation of ammunition and extractor mechanisms in small arms.

Zitieren

APA

Tran, D. D., Macko, M., Tran, D. H., To, T. L., & Racek, F. (2026). Regression model of the extraction force of an automatic rifle cartridge case. Acta Polytechnica, 66(1), 109-116. https://doi.org/10.14311/ap.2026.66.0109

Vancouver

Tran DD, Macko M, Tran DH, To TL, Racek F. Regression model of the extraction force of an automatic rifle cartridge case. Acta Polytechnica. 2026;66(1):109-116. doi:10.14311/ap.2026.66.0109

BibTeX
@article{Tran2026,
  author = {Tran, Dinh Dung and Macko, Martin and Tran, Duc Hoan and To, Thanh Loan and Racek, František},
  title = {Regression model of the extraction force of an automatic rifle cartridge case},
  journal = {Acta Polytechnica},
  year = {2026},
  volume = {66},
  number = {1},
  pages = {109--116},
  doi = {10.14311/ap.2026.66.0109}
}
Kostenlos starten →