Modeling and controlling a half-car model suspension system using an ANFIS controller
PLOS One · 05.11.2026 · 21 (11) · e0361999
DOI: 10.1371/journal.pone.0361999 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 05.11.2026. Verfasst von Sisay Ewunetie Fisha und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Motor Vehicle Engineering, Engineering College, Ethiopian Defence University, Bishoftu, Ethiopia. Hauptthemen laut MEDLINE: Models, Theoretical, Automobiles. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Passive suspension systems (PSS) use fixed spring and damping characteristics and cannot adapt to changing road disturbances and operating conditions. Active suspension systems (ASS) address this limitation by generating additional control forces, but controller design must balance ride comfort, road holding, model uncertainty, and control effort. This study develops a four-degree-of-freedom (4-DOF) longitudinal half-car model and evaluates an Adaptive Neuro-Fuzzy Inference System (ANFIS) controller against PSS and PID-controlled ASS under double-bump and ISO-classified random Type A and Type C Road profiles at 10 and 20 m/s. The ANFIS controller is trained using PID-generated input-output data with two inputs, five Gaussian membership functions per input, 25 Takagi-Sugeno rules, and 150 training epochs. For the double-bump case at 10 m/s, ANFIS reduces body vertical displacement from 0.0435 to 0.0084 m (80.6%), vertical acceleration from 2.40 to 0.77 m/s 2 (67.9%), and front suspension travel from 0.0652 to 0.0090 m (86.2%) relative to PSS. Compared with PID, the corresponding reductions are 53.6%, 49.3%, and 43.8%, respectively. Settling time is reduced by 38.8% for body vertical displacement and 38.6% for pitch acceleration relative to PSS. The result meets all the qualifications for riding comfort of the ISO 2631 standard. The study identifies limitations related to PID-supervised training, linear modeling, and actuator-energy assessment by employing simulation. Experimental evaluation is required to establish robustness to parameter uncertainty, sensor noise, actuator delay, and implementation energy requirements.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Department of Motor Vehicle Engineering, Engineering College, Ethiopian Defence University, Bishoftu, Ethiopia.
- Department of Mechanical Engineering, Center of Excellence for Transport and Vehicle Engineering, Adama Science and Technology University, Adama, Ethiopia.
ORCID-Profile: Amanuel Gebisa Aga
Zitieren
APA
Fisha, S. E., Aga, A. G., & Wachamo, T. M. (2026). Modeling and controlling a half-car model suspension system using an ANFIS controller. PLOS One, 21(11), e0361999. https://doi.org/10.1371/journal.pone.0361999
Vancouver
Fisha SE, Aga AG, Wachamo TM. Modeling and controlling a half-car model suspension system using an ANFIS controller. PLOS One. 2026;21(11):e0361999. doi:10.1371/journal.pone.0361999
BibTeX
@article{Fisha2026,
author = {Fisha, Sisay Ewunetie and Aga, Amanuel Gebisa and Wachamo, Tatek Mamo},
title = {Modeling and controlling a half-car model suspension system using an ANFIS controller},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {11},
pages = {e0361999},
doi = {10.1371/journal.pone.0361999}
}
EUVIMED