EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Calibration and experimental verification of discrete element simulation parameters of seedling pot based on NSGA-II algorithm

Dong Ji, Jia Shi, Zhu Zhao, Fengbo Liu, Chenghu Guo, Yongqi Wang, Subo Tian

PLOS One · 20.11.2026 · 21 (11) · e0361917

DOI: 10.1371/journal.pone.0361917 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 20.11.2026. Verfasst von Dong Ji und 6 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Liaoning Provincial Department of Education Basic Research Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the accuracy of the simulation parameters used in discrete element simulations of transplanting operations and to facilitate further optimization of key transplanter components, this study calibrated and optimized the discrete element model of the seedling pot (16 × 8 holes) based on puncture and shear tests. The contact parameters of the seedling pot were determined through basic tests. The Plackett-Burman test was used to select the initial parameters and determine their value ranges. The shear strength ( X 2 ), the static friction coefficient ( X 4 ), and the ultimate stress ( X 10 ) significantly affected the puncture and shear forces. Based on the central composite design (CCD), a two-objective (puncture force and shear force) regression model was established, and the optimal values were obtained with Design-Expert software. When X 2 , X 4 , and X 10 were 1.4, 0.885, and 0.115, respectively, the predicted puncture and shear forces were 6.4 N and 11.62 N. Compared with the measured values (6.4 N and 11.3 N), the software solution emphasized the puncture force. The parameters were then substituted into EDEM (2022, Altair Engineering Inc., Troy, MI, USA) for simulation, giving simulation values of 7.2 N and 10.1 N. The relative errors with respect to the measured values were 12.5% and 10.6%, respectively. The calculation has defects. In this study, the multi-objective optimization based on NSGA-II algorithm was applied to the EDEM parameter model. A set of optimized Pareto optimal solutions were selected and simulated. The relative errors of the resulting model were small, namely 6.25% and 7.08%. The results indicate the potential feasibility of the NSGA-II calibration method under the investigated conditions.

Förderung

  • Liaoning Provincial Department of Education Basic Research Project

Zitieren

APA

Ji, D., Shi, J., Zhao, Z., Liu, F., Guo, C., Wang, Y., & Tian, S. (2026). Calibration and experimental verification of discrete element simulation parameters of seedling pot based on NSGA-II algorithm. PLOS One, 21(11), e0361917. https://doi.org/10.1371/journal.pone.0361917

Vancouver

Ji D, Shi J, Zhao Z, Liu F, Guo C, Wang Y, et al. Calibration and experimental verification of discrete element simulation parameters of seedling pot based on NSGA-II algorithm. PLOS One. 2026;21(11):e0361917. doi:10.1371/journal.pone.0361917

BibTeX
@article{Ji2026,
  author = {Ji, Dong and Shi, Jia and Zhao, Zhu and Liu, Fengbo and Guo, Chenghu and Wang, Yongqi and Tian, Subo},
  title = {Calibration and experimental verification of discrete element simulation parameters of seedling pot based on NSGA-II algorithm},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {11},
  pages = {e0361917},
  doi = {10.1371/journal.pone.0361917}
}
Kostenlos starten →