Parameter calibration of the simulation model for coated rice seeds in UAV seeding based on discrete element methodology
Parameterkalibrierung des Simulationsmodells für beschichtete Reissamen bei der UAV-Aussaat auf Basis der Diskrete-Elemente-Methode
PLOS One · 06.11.2026 · 21 (11) · e0361229
DOI: 10.1371/journal.pone.0361229 ↗Auf einen Blick
Die Studie kalibrierte DEM-Parameter für beschichtete Reissamen für die UAV-Aussaat. Die verifizierten Parameter zeigten bei 3 Prüfgrößen mittlere relative Fehler von unter 5 %.
Fragestellung
Wie lassen sich DEM-Parameter für die Simulation beschichteter Reissamen bei der UAV-Aussaat kalibrieren?
Methode
Physische und Simulationsexperimente; 3-stufige Optimierung mit Plackett-Burman-Test, Steepest-Ascent-Test und quadratischem orthogonalem Rotationsversuch.
Ergebnisse
4 signifikante Parameter wurden identifiziert. Die optimale Kombination war 0,35, 0,22, 0,09 und 0,51. Die Verifikation mit statischem und dynamischem Schüttwinkel sowie der Gesamt-Saatrate ergab mittlere relative Fehler unter 5 %.
Schlussfolgerung der Autor:innen
Die kalibrierten Parameter sind laut Autor:innen zuverlässig für DEM-Simulationen beschichteter Reissamen; die mehrstufige Methode verbessert die Kalibrierungsgenauigkeit und Anwendbarkeit.
Kernaussagen
- 4 Parameter waren für die Kalibrierung signifikant.
- Optimale Kombination: 0,35; 0,22; 0,09; 0,51.
- Verifikation: Fehler unter 5 % bei 3 Prüfgrößen.
Deutsche Zusammenfassung: KI-gestützt aus dem Original-Abstract erstellt; alle Zahlen wurden automatisch mit dem Original abgeglichen. Maßgeblich ist der Original-Abstract.
Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 06.11.2026. Verfasst von Yu Qingxu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Nanjing Institute of agricultural mechanization, Ministry of Agriculture and Rural Areas, Nanjing, China. Hauptthemen laut MEDLINE: Oryza, Seeds, Unmanned Aerial Devices, Agriculture. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Special Fund for Basic Scientific Research of the Chinese Academy of Agricultural Sciences, The Agricultural Science and Technology Innovation Program of the Chinese Academy of Agricultural Sciences.
Abstract (Originalsprache)
The discrete element method (DEM) is widely used in agricultural mechanization, but accurate parameter calibration for UAV seeding simulation of coated rice seeds remains challenging due to empirical parameter selection and single-stage optimization in existing studies. This study combined physical and simulation experiments to calibrate DEM parameters for coated rice seeds (CRS). Physical tests measured the intrinsic parameters and actual repose angle (18.84°). A three-stage progressive optimization strategy was then adopted: Plackett–Burman test to screen significant parameters, steepest ascent test to narrow the optimal range, and quadratic rotation orthogonal combination test to establish a regression model. Four significant parameters were identified: the CRS-CRS coefficient of restitution (C), the CRS-CRS coefficient of static friction (D), the CRS-CRS coefficient of rolling friction (E), and the CRS-stainless steel coefficient of static friction (G). The optimal combination was determined as 0.35, 0.22, 0.09, and 0.51, respectively. Verification using static repose angle, dynamic repose angle, and UAV total seeding rate showed average relative errors below 5% for all three indices. These results demonstrate that the calibrated parameters are reliable for DEM simulation of coated rice seeds, and the proposed multi-stage method effectively improves calibration accuracy and model applicability for UAV seeding operations.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Nanjing Institute of agricultural mechanization, Ministry of Agriculture and Rural Areas, Nanjing, China.
- Key Laboratory of Modern Agricultural Equipment, Ministry of Agriculture and Rural Affairs, Nanjing, China.
- Institute of Western Agriculture, Chinese Academy of Agricultural Science, Changji, China.
ORCID-Profile: Yu Qingxu
Förderung
- the Special Fund for Basic Scientific Research of the Chinese Academy of Agricultural Sciences
- The Agricultural Science and Technology Innovation Program of the Chinese Academy of Agricultural Sciences
Zitieren
APA
Qingxu, Y., Liu, M., Gong, Y., Chen, X., & Hu, J. (2026). Parameter calibration of the simulation model for coated rice seeds in UAV seeding based on discrete element methodology. PLOS One, 21(11), e0361229. https://doi.org/10.1371/journal.pone.0361229
Vancouver
Qingxu Y, Liu M, Gong Y, Chen X, Hu J. Parameter calibration of the simulation model for coated rice seeds in UAV seeding based on discrete element methodology. PLOS One. 2026;21(11):e0361229. doi:10.1371/journal.pone.0361229
BibTeX
@article{Qingxu2026,
author = {Qingxu, Yu and Liu, Mengxiao and Gong, Yan and Chen, Xiao and Hu, Jianling},
title = {Parameter calibration of the simulation model for coated rice seeds in UAV seeding based on discrete element methodology},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {11},
pages = {e0361229},
doi = {10.1371/journal.pone.0361229}
}
EUVIMED