EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural and physicochemical characterization, mechanical and durability performance with statistical evaluation of montmorillonite-impregnated burnt red soil bricks incorporating pyrolyzed coffee and tobacco biochars

Amani Abdallah Hepautwa iD, Askwar Hilonga, Register Mrosso, Tusekile Alfredy, Yusufu Abeid Chande Jande

PLOS One · 2026

DOI: 10.1371/journal.pone.0357232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von Amani Abdallah Hepautwa und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials and Energy Sciences and Engineering, Nelson Mandela African Institution of Science and Technology, Arusha, Tanzania. Hauptthemen laut MEDLINE: Coffee, Bentonite, Soil, Construction Materials. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growing demand for sustainable construction materials has increased interest in utilizing agricultural waste as functional additives in fired clay products. However, limited information is available regarding the influence of pyrolysis temperature on the engineering performance, durability, and physicochemical characteristics of biomass-modified burnt red soil bricks. This study investigated the effects of pyrolyzed coffee grounds (PCG) and pyrolyzed tobacco grounds (PTG) produced at 300°C, 350°C, and 500°C and incorporated at replacement levels of 5%, 10%, 15%, and 20% into burnt red soil bricks containing 10% montmorillonite. Mechanical performance was evaluated through compressive, tensile, and flexural strength tests, while durability was assessed using water, chloride, and sulphur penetration measurements. Microstructural and physicochemical characterization was conducted using FTIR, XRD, DSC, Raman spectroscopy, and SEM analyses. Statistical significance was evaluated using analysis of variance (ANOVA) followed by Tukey’s honestly significant difference (HSD) post-hoc test at a 95% confidence level. The results demonstrated that biomass type, pyrolysis temperature, and replacement level significantly influenced both mechanical and durability properties (p < 0.05). Among all investigated mixtures, PCG350−10 exhibited the optimum performance, achieving compressive, tensile, and flexural strengths of 11.8 MPa, 2.8 MPa, and 3.9 MPa, respectively, compared with 8.5 MPa, 1.5 MPa, and 2.2 MPa for the control specimen. Similarly, water, chloride, and sulphur penetration depths decreased from 38 mm, 32 mm, and 35 mm in the control brick to 12 mm, 10 mm, and 11 mm, respectively, representing reductions of approximately 68–69%. Tukey HSD analysis confirmed that PCG350−10 was statistically superior to the control and most alternative formulations. Characterization results revealed progressive thermal transformation of biomass constituents with increasing pyrolysis temperature and indicated that the 350°C condition produced a favorable balance between carbon stabilization, structural integrity, and pore refinement. SEM observations further demonstrated a denser and more homogeneous morphology for the optimum mixtures compared with the control and high-replacement specimens. Overall, the findings demonstrate that incorporating 10% pyrolyzed coffee grounds produced at 350°C significantly enhances the mechanical performance and durability of montmorillonite-modified burnt red soil bricks while providing a sustainable pathway for agricultural waste valorization and resource-efficient construction materials.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CoffeeBentoniteSoilConstruction MaterialsNicotianaCharcoalPyrolysisTensile StrengthCompressive StrengthBiomass

Substanzen

CoffeeBentoniteSoilCharcoal

Autor:innen und Institutionen

  • Department of Materials and Energy Sciences and Engineering, Nelson Mandela African Institution of Science and Technology, Arusha, Tanzania.
  • Department of Civil and Irrigation Engineering, Mwalimu Julius K. Nyerere University of Agriculture and Technology, Musoma, (Butiama-HQ), Tanzania.
  • Water Infrastructure and Sustainable Energy Futures (WISE-Futures) African Centre of Excellence Road, Tengeru, Arusha, Tanzania.

ORCID-Profile: Amani Abdallah Hepautwa

Zitieren

APA

Hepautwa, A. A., Hilonga, A., Mrosso, R., Alfredy, T., & Jande, Y. A. C. (2026). Microstructural and physicochemical characterization, mechanical and durability performance with statistical evaluation of montmorillonite-impregnated burnt red soil bricks incorporating pyrolyzed coffee and tobacco biochars. PLOS One. https://doi.org/10.1371/journal.pone.0357232

Vancouver

Hepautwa AA, Hilonga A, Mrosso R, Alfredy T, Jande YAC. Microstructural and physicochemical characterization, mechanical and durability performance with statistical evaluation of montmorillonite-impregnated burnt red soil bricks incorporating pyrolyzed coffee and tobacco biochars. PLOS One. 2026. doi:10.1371/journal.pone.0357232

BibTeX
@article{Hepautwa2026,
  author = {Hepautwa, Amani Abdallah and Hilonga, Askwar and Mrosso, Register and Alfredy, Tusekile and Jande, Yusufu Abeid Chande},
  title = {Microstructural and physicochemical characterization, mechanical and durability performance with statistical evaluation of montmorillonite-impregnated burnt red soil bricks incorporating pyrolyzed coffee and tobacco biochars},
  journal = {PLOS One},
  year = {2026},
  doi = {10.1371/journal.pone.0357232}
}
Kostenlos starten →