EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction model for compressive strength of alkali-activated multi-source solid-waste grouting materials based on generative adversarial networks and machine learning

Qiang Yue, Guangming Yu iD, Yong Yao, Zhiqi Yang, Yufeng Li, Liyang Bai, Guangwei Xiong

PLOS One · 2026

DOI: 10.1371/journal.pone.0357051 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von Qiang Yue und 6 weiteren Autor:innen. Beteiligte Einrichtung: China Construction Fifth Engineering Bureau Co., Ltd., Changsha, Hunan, China. Hauptthemen laut MEDLINE: Compressive Strength, Machine Learning, Alkalies. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Alkali-activated multi-source solid-waste grouting materials have attracted increasing attention in geotechnical and underground engineering due to their low carbon footprint, environmental friendliness, and potential for large-scale resource utilization. However, the complex composition and multiple influencing factors of these materials pose significant challenges for understanding and predicting their compressive strength, particularly under conditions characterized by small sample sizes, high-dimensional variables, and strong nonlinearity. To address these issues, an experimental database comprising 179 UCS records compiled from three independent experimental studies was established. Fifteen experimental records were reserved for external validation, while WGAN-GP was trained using the remaining 164 model-development samples, thereby keeping the external validation set completely isolated from model development. Multiple machine learning models were then developed to establish a UCS prediction framework. Furthermore, the Newton–Raphson-Based Optimizer (NRBO) was applied to optimize the hyperparameters of the XGBoost model, resulting in an NRBO-XGBoost prediction model. The SHAP method was introduced to interpret the prediction results and quantify the contribution of each input variable. The results demonstrate that WGAN-GP effectively preserves the statistical characteristics and inter-variable correlations of the original data, thereby improving model-training stability and generalization performance. Among all models considered, NRBO-XGBoost exhibited the best predictive performance, achieving an R 2 of 0.964, an RMSE of 3.411 MPa, and an MAE of 2.474 MPa in the testing phase. SHAP analysis further revealed that cement content, water-to-binder ratio, curing age, alkali equivalent, and ground granulated blast-furnace slag content play dominant roles in governing compressive strength development. The integrated framework of data augmentation, optimized modeling, and interpretable analysis proposed in this study provides reliable data-driven decision support for mix design optimization and engineering application of alkali-activated multi-source solid-waste grouting materials, and offers a novel technical pathway for performance prediction of complex cementitious materials.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Compressive StrengthMachine LearningAlkaliesGenerative Adversarial NetworksPredictive Learning ModelsBoosting Machine Learning AlgorithmsPrediction Algorithms

Substanzen

Alkalies

Autor:innen und Institutionen

  • China Construction Fifth Engineering Bureau Co., Ltd., Changsha, Hunan, China.
  • School of Civil Engineering, Qingdao University of Technology, Qingdao, Shandong, China.
  • Department of Resources and Mechanical Engineering, Lvliang University, Lvliang, Shanxi, China.

ORCID-Profile: Guangming Yu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yue, Q., Yu, G., Yao, Y., Yang, Z., Li, Y., Bai, L., & Xiong, G. (2026). Prediction model for compressive strength of alkali-activated multi-source solid-waste grouting materials based on generative adversarial networks and machine learning. PLOS One. https://doi.org/10.1371/journal.pone.0357051

Vancouver

Yue Q, Yu G, Yao Y, Yang Z, Li Y, Bai L, et al. Prediction model for compressive strength of alkali-activated multi-source solid-waste grouting materials based on generative adversarial networks and machine learning. PLOS One. 2026. doi:10.1371/journal.pone.0357051

BibTeX
@article{Yue2026,
  author = {Yue, Qiang and Yu, Guangming and Yao, Yong and Yang, Zhiqi and Li, Yufeng and Bai, Liyang and Xiong, Guangwei},
  title = {Prediction model for compressive strength of alkali-activated multi-source solid-waste grouting materials based on generative adversarial networks and machine learning},
  journal = {PLOS One},
  year = {2026},
  doi = {10.1371/journal.pone.0357051}
}
Kostenlos starten →