EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization design of sand-containing fog seal overlay on chip seal based on response surface methodology

Jun'an Lei, Xiaoyu Jiang, Qiliang Liu iD, Yongtai He

PLOS One · 12.08.2026 · 21 (8) · e0355403

DOI: 10.1371/journal.pone.0355403 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 12.08.2026. Verfasst von Jun'an Lei und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering and Architecture, HuBei University of Arts and Science, Xiangyang, Hubei, China. Hauptthemen laut MEDLINE: Sand. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hubei University of Arts and Sciences Research Initiation Fund Project, Guiding Project of Scientific Research Plan of Hubei Provincial Department of Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the durability of the chip seal and reduce the chip loss rate, a sand-containing fog seal was covered on its surface, and the response surface methodology (RSM) was adopted to optimize the mix proportion. The amount of emulsified asphalt and sand-binder ratio were selected as key factors, and experimental research was conducted with anti-skid performance, texture depth, and Vialit mass loss rate as response indicators. The results indicate that the regression model established between response values and factors exhibits good fitting degree. The increase of emulsified asphalt can significantly improve the bond strength, but it will reduce the anti-skid performance. The increase in sand-binder ratio helps to improve the pendulum friction value, but it will reduce the texture depth. For chip seal of 3–5 mm and 5–10 mm, it is recommended to use emulsified asphalt at 0.46 kg/m 2 and 0.62 kg/m 2 , and a sand-binder ratio of 0.58 and 0.70, respectively. The optimized sand-containing fog seal exhibits good water sealing performance and reasonable open traffic time, which can significantly improve the durability and road performance of the chip seal. The research provides theoretical basis and technical support for the material design and engineering application of sand-containing fog seal.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SandHydrocarbonsSurface PropertiesSilicon DioxideFriction

Substanzen

SandasphaltHydrocarbonsSilicon Dioxide

Autor:innen und Institutionen

  • School of Civil Engineering and Architecture, HuBei University of Arts and Science, Xiangyang, Hubei, China.
  • Hubei Key Laboratory of Vehicle-Infrastructure Cooperation and Traffic Control, Hubei University of Arts and Science, Xiangyang, Hubei, China.
  • School of Civil Engineering, Science and Technology College of Hubei University of Arts and Science, Xiangyang, Hubei, China.
  • CCCC First Highway Consultants Co., Ltd, Xi an, Shaanxi, China.

ORCID-Profile: Qiliang Liu

Förderung

  • Hubei University of Arts and Sciences Research Initiation Fund Project
  • Guiding Project of Scientific Research Plan of Hubei Provincial Department of Education

Zitieren

APA

Lei, J., Jiang, X., Liu, Q., & He, Y. (2026). Optimization design of sand-containing fog seal overlay on chip seal based on response surface methodology. PLOS One, 21(8), e0355403. https://doi.org/10.1371/journal.pone.0355403

Vancouver

Lei J, Jiang X, Liu Q, He Y. Optimization design of sand-containing fog seal overlay on chip seal based on response surface methodology. PLOS One. 2026;21(8):e0355403. doi:10.1371/journal.pone.0355403

BibTeX
@article{Lei2026,
  author = {Lei, Jun'an and Jiang, Xiaoyu and Liu, Qiliang and He, Yongtai},
  title = {Optimization design of sand-containing fog seal overlay on chip seal based on response surface methodology},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {8},
  pages = {e0355403},
  doi = {10.1371/journal.pone.0355403}
}
Kostenlos starten →