Optimization of CNC milling parameters for YXR-7 tool steel using fuzzy MARCOS: A multi-response approach to improve machining productivity
PLOS One · 29.07.2026 · 21 (7) · e0352316
DOI: 10.1371/journal.pone.0352316 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 29.07.2026. Verfasst von Adooru L N Arunkumar und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Chennai, India. Hauptthemen laut MEDLINE: Steel. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study presents an integrated optimisation method for CNC milling of heat-treated YXR7 tool steel using carbide cutting inserts under varying lubrication and process parameters. A full factorial experimental design comprising 27 runs was employed to assess the influence of depth of cut ( d c ), feed per tooth ( f t ), cutting speed ( C s ), and nano-cutting fluid ( C f ) on critical performance responses such as surface roughness ( Ra ), material removal rate ( MRR ), and tool wear rate ( TWR ). An advanced modelling through regression and ANOVA showed complex interactive and non-linear effects among process parameters. To effectively navigate these interdependencies, a novel hybrid decision-making model combining the Full Consistency Method (FUCOM) and fuzzy-MARCOS was employed. This multi-criteria decision-making (MCDM) method was described for uncertainties in machining performance and successfully ranked experimental alternatives based on their proximity to ideal performance. The optimal configuration (Experiment 21) accomplished a superior balance across all criteria, notably achieving a low surface roughness (Ra ≈ 0.42 µm) and TWR (~0.148 mm³/min) while maintaining a high MRR (~109.4 mm³/min). The proposed fuzzy-FUCOM-MARCOS method reveals high robustness, adaptability, and decision reliability, contributing a valuable strategy for precision machining of hard-to-cut steels. This work bridges experimental understandings with intelligent optimisation, fostering sustainable and high-performance manufacturing practices in the tooling industry.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Chennai, India.
- Department of Mechanical Engineering, CVR College of Engineering, Hyderabad, India.
- Department of Mechanical Engineering, SRM University-AP, Amaravati, Mangalagiri, Andhra Pradesh, India.
- Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, India.
ORCID-Profile: Sunil Kumar, Ankur Jaiswal
Zitieren
APA
Arunkumar, A. L. N., Kumar, S., Nampoothiri, K. N., Jha, A., & Jaiswal, A. (2026). Optimization of CNC milling parameters for YXR-7 tool steel using fuzzy MARCOS: A multi-response approach to improve machining productivity. PLOS One, 21(7), e0352316. https://doi.org/10.1371/journal.pone.0352316
Vancouver
Arunkumar ALN, Kumar S, Nampoothiri KN, Jha A, Jaiswal A. Optimization of CNC milling parameters for YXR-7 tool steel using fuzzy MARCOS: A multi-response approach to improve machining productivity. PLOS One. 2026;21(7):e0352316. doi:10.1371/journal.pone.0352316
BibTeX
@article{Arunkumar2026,
author = {Arunkumar, Adooru L N and Kumar, Sunil and Nampoothiri, Krishnadas Narayanan and Jha, Abhishek and Jaiswal, Ankur},
title = {Optimization of CNC milling parameters for YXR-7 tool steel using fuzzy MARCOS: A multi-response approach to improve machining productivity},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {7},
pages = {e0352316},
doi = {10.1371/journal.pone.0352316}
}
EUVIMED