EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of mechanical properties and micro-mechanisms of concrete based on the method of using steel slag as aggregate replacement: Macro-mechanical tests and microscopic tests of four typical control groups

Xiaobing Chen, Hengyi Yang iD, Jinhu Tong, Wei Hu, Fengyi Kang, Miao Zhang, Laiyuan Mao, Ronglong Zhao

PLOS One · 23.07.2026 · 21 (7) · e0352138

DOI: 10.1371/journal.pone.0352138 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 23.07.2026. Verfasst von Xiaobing Chen und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Transportation, Southeast University, Nanjing, Jiangsu, China. Hauptthemen laut MEDLINE: Steel, Construction Materials, Materials Testing. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nantong Transportation Bureau.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

There is still controversy over whether the mechanical properties of steel slag concrete are superior to those of ordinary crushed-stone concrete and which method of substituting steel slag for aggregates yields better mechanical performance. Four groups of specimens were designed in this study, namely ordinary crushed-stone concrete, coarse steel-slag natural-sand concrete, crushed-stone fine steel-slag concrete, and all-steel slag concrete. The compressive strength, flexural strength, splitting tensile strength and failure morphology of the four groups of specimens were tested. Meanwhile, microhardness, scanning electron microscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy tests were conducted to analyze the differences in their mechanical properties from a microscopic perspective. The corresponding test results indicated that: (a) Under the test conditions of this study, the order of compressive strength, flexural strength, and splitting tensile strength of concrete is ordinary crushed-stone concrete < coarse steel-slag natural-sand concrete

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SteelConstruction MaterialsMaterials TestingTensile StrengthCompressive StrengthX-Ray DiffractionMicroscopy, Electron, ScanningMechanical Tests

Substanzen

Steel

Autor:innen und Institutionen

  • School of Transportation, Southeast University, Nanjing, Jiangsu, China.
  • Architects and Engineers Co., Ltd. of Southeast University, Nanjing, Jiangsu, China.
  • Nantong Highway Development Center, Nantong, Jiangsu, China.
  • Liaoning Provincial Transportation Development Center, Shenyang, Liaoning, China.
  • Wuxi Metro Operation Co., Ltd. Metro Building, Wuxi, Jiangsu, China.

ORCID-Profile: Hengyi Yang

Förderung

  • Nantong Transportation Bureau

Zitieren

APA

Chen, X., Yang, H., Tong, J., Hu, W., Kang, F., Zhang, M., Mao, L., & Zhao, R. (2026). Analysis of mechanical properties and micro-mechanisms of concrete based on the method of using steel slag as aggregate replacement: Macro-mechanical tests and microscopic tests of four typical control groups. PLOS One, 21(7), e0352138. https://doi.org/10.1371/journal.pone.0352138

Vancouver

Chen X, Yang H, Tong J, Hu W, Kang F, Zhang M, et al. Analysis of mechanical properties and micro-mechanisms of concrete based on the method of using steel slag as aggregate replacement: Macro-mechanical tests and microscopic tests of four typical control groups. PLOS One. 2026;21(7):e0352138. doi:10.1371/journal.pone.0352138

BibTeX
@article{Chen2026,
  author = {Chen, Xiaobing and Yang, Hengyi and Tong, Jinhu and Hu, Wei and Kang, Fengyi and Zhang, Miao and Mao, Laiyuan and Zhao, Ronglong},
  title = {Analysis of mechanical properties and micro-mechanisms of concrete based on the method of using steel slag as aggregate replacement: Macro-mechanical tests and microscopic tests of four typical control groups},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {7},
  pages = {e0352138},
  doi = {10.1371/journal.pone.0352138}
}
Kostenlos starten →