Hybrid RSM–NSGA-II based multi-objective optimization of electrical discharge machining of AISI D2 steel
PLOS One · 02.07.2026 · 21 (7) · e0350415
DOI: 10.1371/journal.pone.0350415 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 02.07.2026. Verfasst von Suman Mondal und 5 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, Ramkrishna Mahato Government Engineering College, Purulia, West Bengal, India. Hauptthemen laut MEDLINE: Steel, Electricity. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, electrical discharge machining (EDM) of AISI D2 die steel was performed by varying three different process parameters: peak current (Ip), pulse-on time (Ton), and duty cycle (c). Enhancing both surface quality and machining performance is very important for die steel applications; therefore, a hybrid approach for multi-objective optimization was employed. A Box–Behnken design of response surface methodology (RSM) was utilized to conduct the experiments, while analysis of variance (ANOVA) was used to examine the influence of process parameters on the responses. Mathematical models were developed using RSM, which were finally utilized as fitness functions for the Non-Dominated Sorting Genetic Algorithm II (NSGA-II) to get solutions of multi-objective optimization. The algorithm generated a set of non-dominated solutions forming the Pareto frontier. To identify the most desirable solution, the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) was used. The optimal results obtained through TOPSIS analysis were a surface roughness of 5.22 µm and a material removal rate (MRR) of 0.250 g/min, corresponding to the process parameters: peak current (Ip) = 10.03 A, pulse-on time (Ton) = 30.70 µs, and duty cycle (c) = 14.94%.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Mechanical Engineering Department, Ramkrishna Mahato Government Engineering College, Purulia, West Bengal, India.
- Department of Mechanical Engineering, National Institute of Technology Silchar, Silchar, Assam, India.
- Department of Biosciences, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, Tamil Nadu, India.
- Department of Production Engineering, Jadavpur University, Kolkata, West Bengal, India.
- Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India.
ORCID-Profile: Prosun Mandal, Ranjan Kumar Ghadai
Zitieren
APA
Mondal, S., Sardar, B. S., Mandal, P., Samal, S. P., Doloi, B., & Ghadai, R. K. (2026). Hybrid RSM–NSGA-II based multi-objective optimization of electrical discharge machining of AISI D2 steel. PLOS One, 21(7), e0350415. https://doi.org/10.1371/journal.pone.0350415
Vancouver
Mondal S, Sardar BS, Mandal P, Samal SP, Doloi B, Ghadai RK. Hybrid RSM–NSGA-II based multi-objective optimization of electrical discharge machining of AISI D2 steel. PLOS One. 2026;21(7):e0350415. doi:10.1371/journal.pone.0350415
BibTeX
@article{Mondal2026,
author = {Mondal, Suman and Sardar, Biswajit Sing and Mandal, Prosun and Samal, S P and Doloi, Biswanath and Ghadai, Ranjan Kumar},
title = {Hybrid RSM–NSGA-II based multi-objective optimization of electrical discharge machining of AISI D2 steel},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {7},
pages = {e0350415},
doi = {10.1371/journal.pone.0350415}
}
EUVIMED