Seismic fragility analysis of fully prefabricated frame structures with steel plate hoop bolt connections based on various engineering demand parameters
PLOS One · 27.05.2026 · 21 (5) · e0350096
DOI: 10.1371/journal.pone.0350096 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 27.05.2026. Verfasst von Zhiyuan Gao und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Transportation Engineering, Yellow River Conservancy Technical University, Kaifeng, China. Hauptthemen laut MEDLINE: Steel, Materials Testing, Construction Materials, Engineering. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kaifeng City Science and Technology Plan Project, Henan Province University-Enterprise Collaborative Innovation Project, Open Research Fund of Key Laboratory of Coastal Urban Resilient Infrastructures (Shenzhen University), Ministry of Education.
Abstract (Originalsprache)
Steel plates and bolted connections have become common construction details in prefabricated structural systems. However, prefabricated frame structures with steel plate hoop–bolted connections exhibit connection gaps, interface slip, and discontinuous force-transfer paths, making them prone to hysteretic degradation and cumulative damage under seismic loading. Conventional seismic fragility assessments typically rely on the maximum inter-story drift ratio, which focuses only on deformation demand and fails to capture key deterioration mechanisms such as low-cycle damage accumulation, stiffness degradation, and reduced energy dissipation capacity. Consequently, the seismic performance of prefabricated structures may be inadequately represented. To address this limitation, this study adopts a two-parameter damage model as the engineering demand parameter for incremental dynamic analysis (IDA) and fragility assessment, and compares it with the traditional drift-based index. An energy-dissipation-based story damage weighting method is further introduced to better characterize damage distribution and performance degradation along the structural height. Finite element models of prefabricated columns and beam–column joints with steel plate hoop–bolted connections were developed in SAP2000 using multilinear plastic link elements and validated against quasi-static test results. A comparative fragility analysis was then performed for six-story full prefabricated and cast-in-place frame structures. The results show that the inter-story drift ratio underestimates structural capacity in the elastic stage but overestimates collapse resistance compared with the two-parameter damage model.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- School of Civil and Transportation Engineering, Yellow River Conservancy Technical University, Kaifeng, China.
- Guangdong Provincial Key Laboratory of Intelligent Disaster Prevention and Emergency Technologies for Urban Lifeline Engineering, Dongguan University of Technology, Dongguan, China.
- College of Urban Development and Modern Transportation, Xi'an University of Architecture and Technology, Xi'an, China.
ORCID-Profile: Jiaolei Zhang
Förderung
- Kaifeng City Science and Technology Plan Project
- Henan Province University-Enterprise Collaborative Innovation Project
- Open Research Fund of Key Laboratory of Coastal Urban Resilient Infrastructures (Shenzhen University), Ministry of Education
Zitieren
APA
Gao, Z., Zhang, J., & Cao, L. (2026). Seismic fragility analysis of fully prefabricated frame structures with steel plate hoop bolt connections based on various engineering demand parameters. PLOS One, 21(5), e0350096. https://doi.org/10.1371/journal.pone.0350096
Vancouver
Gao Z, Zhang J, Cao L. Seismic fragility analysis of fully prefabricated frame structures with steel plate hoop bolt connections based on various engineering demand parameters. PLOS One. 2026;21(5):e0350096. doi:10.1371/journal.pone.0350096
BibTeX
@article{Gao2026,
author = {Gao, Zhiyuan and Zhang, Jiaolei and Cao, Lei},
title = {Seismic fragility analysis of fully prefabricated frame structures with steel plate hoop bolt connections based on various engineering demand parameters},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {5},
pages = {e0350096},
doi = {10.1371/journal.pone.0350096}
}
EUVIMED